Engine Hybrid System. Corolla. Zre142 Aze141
2Az-Fe Engine Control. Corolla. Zre142 Aze141
Throttle Body -- Removal |
1. DRAIN ENGINE COOLANT |
Loosen the lower radiator drain cock plug.
- CAUTION:
- Do not loosen the lower radiator drain cock plug while the engine and radiator are still hot.
- Pressurized, hot engine coolant and steam may be released and cause serious burns.
- HINT:
- Collect the coolant in a container and dispose of it according to the regulations in your area.
Remove the radiator cap.
Loosen the cylinder block drain cock plug.
2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY |
Remove the 2 nuts and No. 1 engine cover sub-assembly.
![]() |
3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH HOSE |
Disconnect the mass air flow meter connector.
![]() |
Separate the 2 wire harness clamps.
Disconnect the No. 1 vacuum switching valve connector and the 2 vacuum hoses.
![]() |
Disconnect the ventilation hose.
![]() |
Loosen the No. 1 air cleaner hose clamp, release the 3 air cleaner assembly clamps and remove the air cleaner cap sub-assembly with No. 1 hose.
![]() |
4. REMOVE THROTTLE BODY ASSEMBLY |
Disconnect the 2 water by-pass hoses.
![]() |
Disconnect the throttle body assembly connector.
![]() |
Remove the 4 bolts and throttle body assembly.
![]() |
Remove the gasket from the intake manifold.
![]() |