Clock On-Vehicle Inspection

Body Electrical. Camry. Acv40 Gsv40
Other System. Camry. Acv40 Gsv40

  1. INSPECT CLOCK ASSEMBLY

Clock -- On-Vehicle Inspection



1. INSPECT CLOCK ASSEMBLY


    Camry. Acv40 Gsv40.Other System.Clock.Clock On-Vehicle Inspection

  1. Disconnect the F3 connector.

  1. Measure the voltage according to the value(s) in the table below.

    Standard voltage:
    Tester Connection
    		Condition
    		Specified Condition
    F3-1 (B) - Body ground
    		Always
    		10 to 14 V
    F3-2 (ACC) - Body ground
    		Turn the ignition switch off
    		Below 1 V
    Turn the ignition switch to the ON position
    		10 to 14 V

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    		Condition
    		Specified Condition
    F3-19 (GND1) - Body ground
    		Always
    		Below 1 Ω
    HINT:
    If the value is not as specified, repair or replace the wire harness or connector.