Low Pitched Horn Removal

Body Electrical. Camry. Acv40 Gsv40
Horn. Camry. Acv40 Gsv40

  1. REMOVE COOL AIR INTAKE DUCT SEAL (for 2GR-FE)

  2. REMOVE FRONT BUMPER ASSEMBLY

  3. REMOVE LOW PITCHED HORN ASSEMBLY

Low Pitched Horn -- Removal



1. REMOVE COOL AIR INTAKE DUCT SEAL (for 2GR-FE)


    Camry. Acv40 Gsv40

  1. Remove the 7 clips and cool air intake duct seal.



2. REMOVE FRONT BUMPER ASSEMBLY


    Camry. Acv40 Gsv40.Horn.Horn System.Low Pitched Horn Removal

  1. Put protective tape around the front bumper assembly.



    Camry. Acv40 Gsv40.Horn.Horn System.Low Pitched Horn Removal

  1. Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

    HINT:
    Use the same procedure for the RH side and LH side.


    Camry. Acv40 Gsv40

  1. Remove the 8 screws, 2 clips, 2 radiator grille protectors and bolt.



    Camry. Acv40 Gsv40

  1. Disengage the 2 claws and disconnect the front bumper assembly as shown in the illustration.

    HINT:
    Use the same procedure for the RH side and LH side.

  1. Disconnect each connector.

  1. w/ TOYOTA Parking Assist-sensor System:

    1. Disengage the clamp and disconnect the No. 1 ultrasonic sensor connector.

  1. w/ Headlight Cleaner System:

    1. Disconnect the headlight cleaner washer hose.



    Camry. Acv40 Gsv40

  1. Remove the front bumper assembly.



3. REMOVE LOW PITCHED HORN ASSEMBLY


    Camry. Acv40 Gsv40

  1. Disconnect the connector.

  1. Remove the bolt and the low pitched horn assembly.