Body Electrical. Camry. Acv40 Gsv40
Park Assist Monitoring. Camry. Acv40 Gsv40
Toyota Parking Assist-Sensor System -- Customize Parameters |
| CUSTOMIZE PARAMETERS |
- NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / Clearance Sonar / Utility / Customize Setting.
Select the setting by referring to the table below.
Warning Display Default Content Setting Rr Sensor Onset Range Wide Set the buzzer activation range for the rear center sensors. Narrow or Wide - Narrow: 600 mm (23.62 in.)
- Wide: 1500 mm (59.06 in.)
Keep Sense Buzzer Avail Make the buzzer sound when the distance between the vehicle and obstacle does not change for more than 3 seconds. Not Avail or Avail - Not Avail: Not Available
- Avail: Available
Fr & Rr Buzzer Volume H Change the buzzer volume setting. L, M1, M2, M3 or H - L: Low volume
- M1: Medium low volume
- M2: Medium volume
- M3: Medium high volume
- H: High volume
Sensor Display Default Content Setting Sensor Condition N Avail Make the front sensors available when the shift lever is in N. Not Avail or Avail - Not Avail: Not Available
- Avail: Available
Reverse Range Front Sensor F Change the operation setting for the front sensors when the shift lever is in R. F or F Stop - F: Front sensors are available
- F Stop: Front sensors are not available
Non P/R Range Rear Sensor R Stop Change the operation setting for the rear sensors when the shift lever is in any position except P or R. R, Rcrn or R Stop - R: All rear sensors are available
- Rcrn: Rear corner sensors are available
- R Stop: All rear sensors are not available
- Narrow: 600 mm (23.62 in.)