Front Side Speaker Removal

Disengage the 2 clips and remove the front door lower frame bracket garnish.

Using a screwdriver with the tip wrapped with protective tape, disengage the 3 claws, and remove the front door inside handle bezel plug.

Using a screwdriver with the tip wrapped with protective tape, disengage the 6 claws and remove the assist grip cover.

Using a screwdriver with the tip wrapped with protective tape, disengage the claw and remove the courtesy light assembly.

Disconnect the connector.

Remove the 3 screws and clip (A).

Using a clip remover, disengage the 9 clips.

Pull up the front door trim board in the direction indicated by the arrow.

Disengage the reference bosses from the front door panel.

Raise the front door trim board to disengage the 4 claws and remove the front door trim board together with the front door inner glass weatherstrip.

Disengage the 2 claws and disconnect the front door inside handle sub-assembly.

Using a screwdriver, disengage the 4 clips as shown in the illustration and remove the front door inner glass weatherstrip from the front door trim board.

Disconnect the connector.

Remove the 4 bolts and front No. 1 speaker assembly.

NOTICE:

Do not touch the cone part of the speaker.

Pull the upper part of the garnish toward the inside of the cabin and disengage the 2 clips.

Cut off the clip <A>.

Disengage the 2 claws and remove the front pillar garnish LH.

Remove the clip <A> from the vehicle body.

Protect the curtain shield airbag assembly.

1. Cover the airbag with a 700 mm (27.56 in.) x 120 mm (4.72 in.) cloth or piece of nylon and fix the ends of the cover with tape, as shown in the illustration.
   

   NOTICE:

   Cover the curtain shield airbag with a protective cover as soon as the front pillar garnish is removed.

Engage the 6 claws and 2 clips.

Remove the instrument panel No. 2 speaker panel sub-assembly.

Remove the 2 bolts and front No. 2 speaker assembly.

Disconnect the connector.