Wireless Door Lock Control System (W/ Entry And Start System) Data List / Active Test

Body Electrical. Camry. Acv40 Gsv40
Door Lock. Camry. Acv40 Gsv40

  1. DATA LIST

  1. ACTIVE TEST

Wireless Door Lock Control System (W/ Entry And Start System) -- Data List / Active Test



DATA LIST
HINT:
Using the intelligent tester to read the Data List allows switch, sensor, actuator and other item values to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List early in troubleshooting is one way to save diagnostic time.
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / MAIN BODY / Data List.

  5. Read the Data List according to the display on the tester.

    Main Body (Main body ECU)
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Wireless Control
    		Wireless door lock control function / ON or OFF
    		ON: Operating
    OFF: Not operating
    		-
    Hazard Answer Back
    		Hazard answer-back of wireless / ON or OFF
    		ON: Operating
    OFF: Not operating
    		-
    Open Door Warning
    		Open door warning / ON or OFF
    		ON: Operating
    OFF: Not operating
    		-
    Auto Lock Time
    		Automatic lock time / 120s, 60s or 30s
    		120s: 120 seconds
    60s: 60 seconds
    30s: 30 seconds
    		-
    Trunk Lid Operation
    		Luggage compartment door open function type / 1 TIME/2 TIMES/0.8 PR/OFF
    		1 TIME: Luggage compartment door opens when LUGGAGE OPEN switch is pressed once
    2 TIMES: Luggage compartment door opens when LUGGAGE OPEN switch is pressed twice
    0.8 PR: Luggage compartment door opens when LUGGAGE OPEN switch is pressed and held down for 0.8 seconds
    OFF: Not operating
    		-
    Wireless Buzzer Resp
    		Wireless door lock buzzer response / ON or OFF
    		ON: Operating
    OFF: Not operating
    		-


ACTIVE TEST
HINT:
Using the intelligent tester to perform Active Test allows relay, VSV, actuator and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing the Active Test early in troubleshooting is one way to save diagnostic time. The Data List can be displayed during the Active Test.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Enter the following menus: Body / MAIN BODY or Entry&Start / Active Test.

  4. Perform the Active Test according to the display on the tester.

    Main Body (Main body ECU)
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    Hazard
    		Turns the turn signal flasher relay
    		ON/OFF
    		Observe headlight and rear combination light for correct operation
    Illuminated Entry System
    		Interior lights (Interior light switch is in door position and all doors are closed)
    		ON/OFF
    		-
    Trunk and Back-Door Open
    		Turns the back door opener motor
    		ON/OFF
    		Observe back door

    Entry&Start (Certification ECU (Smart Key ECU Assembly))
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    Wireless Buzzer Operation
    		Turns the wireless door lock buzzer
    		ON/OFF
    		-