Wireless Door Lock Control System (W/ Entry And Start System) Operation Check

The wireless door lock/unlock function:
The wireless door lock control function operates only when the following 3 conditions are met:

1. There is no door control transmitter in the cabin.
   

2. All the doors are closed.
   

3. The power door lock system operates normally.
   

   HINT:

   The unlock function operates even when a door is open.

The wireless transmitter operational range differs depending on the situation.

1. The operational range differs depending on the user, the way the transmitter is held, and the location.
   

2. In certain areas, the operational range will be reduced due to the vehicle body shape and the influence of the surrounding environment.
   

3. Since the transmitter uses weak radio waves, the operational range may be reduced or the transmitter may not function if interference or stronger radio waves occur in the area where the transmitter is used.
   

4. When the battery is low, the operational range is reduced and/or the transmitter may not function.
   

   HINT:

   If the transmitter has been left in a place that is exposed to direct sunlight, such as on the instrument panel, the battery may be weakened or other problems may occur.

Establish conditions that allow the wireless control function to be operated successfully.

Check basic functions.

1. Check whether the LED of the transmitter comes on 3 times when each switch is pressed 3 times.
   

   HINT:

   If the LED does not come on when the switch has been pressed 3 times or more, it may have a dead battery.

2. Check that all the doors lock when the lock switch is pressed.
   

3. Check that all the doors unlock when the unlock switch is pressed.
   

Check the luggage compartment door opener function.

1. Check that the luggage compartment door opens when the luggage open switch is held down for 0.8 seconds or more.
   

Check the chattering prevention function.

1. Check that the corresponding operation occurs only once and is not repeated continuously while the switch is held. However, when the switch is operated repeatedly at 1-second intervals, check that the corresponding operation is carried out.
   

Check the automatic lock function.

1. Check that if all doors are unlocked with the unlock switch and none of the doors is opened or locked within approximately 30 seconds, the doors automatically re-lock.
   

2. Check that if all doors are unlocked with the unlock switch and a door is opened or locked within approximately 30 seconds, the automatic lock function does not operate.
   

Check the switch operation fail-safe function.

1. Check that the doors cannot be locked or unlocked by operating a switch on the unregistered transmitter, and that the doors are locked and unlocked by operating a switch on the registered transmitter.
   

Check the door ajar warning function.

1. Check that the wireless door lock buzzer sounds for approximately 10 seconds when the lock switch is pressed with any of the doors ajar or open.
   

Check the repeat function.

1. Check that all the doors attempt to automatically lock once again 1 second after the lock switch has been pressed while the movement of the driver side door control knob, which is in the unlocked state, is being restricted.
   

Check the answer-back function.

1. When the lock switch is pressed, check that the hazard warning lights flash once, simultaneously with the locking operation of all the doors.
   

2. When the unlock switch is pressed, check that the hazard warning lights flash twice, simultaneously with the unlocking operation of all the doors.
   

Check the interior light on function.

HINT:

Turn the interior light switch to the door position before the check.

1. Check that the interior lights comes on simultaneously with the unlocking operation when the unlock switch has been pressed.
   

2. Check that the interior lights goes off in approximately 15 seconds if none of the doors is opened after the unlocking operation.