Power Door Lock Control System Door Key Lock / Unlock Switch Circuit

Body Electrical. Camry. Acv40 Gsv40
Door Lock. Camry. Acv40 Gsv40

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

INSPECT FRONT DOOR LOCK ASSEMBLY RH (DOOR KEY LOCK AND UNLOCK SWITCH)

CHECK WIRE HARNESS (FRONT DOOR LOCK RH - MAIN BODY ECU (INSTRUMENT PANEL J/B))

POWER DOOR LOCK CONTROL SYSTEM - Door Key Lock / Unlock Switch Circuit


DESCRIPTION

The door lock and unlock switch is built into the front passenger door lock assembly.
This switch is ON when the door key is in the unlock position and OFF when the door key is in the lock position. It is used as one of the operating conditions for the key confinement prevention function.

WIRING DIAGRAM


Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Power Door Lock Control System Door Key Lock / Unlock Switch Circuit


Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Power Door Lock Control System Door Key Lock / Unlock Switch Circuit


INSPECTION PROCEDURE

1.INSPECT FRONT DOOR LOCK ASSEMBLY RH (DOOR KEY LOCK AND UNLOCK SWITCH)


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Power Door Lock Control System Door Key Lock / Unlock Switch Circuit

  1. Inspect LHD models.

    1. Remove the front door lock assembly RH.

    2. Measure the resistance according to the value(s) in the table below.

      Standard resistance:
      Tester Connection
      		Condition
      		Specified Condition
      5 - 8
      		ON
      (Door lock set to UNLOCK)
      		Below 1 Ω
      5 - 8
      6 - 8
      		OFF (Free)
      		10 kΩ or higher
      6 - 8
      		ON
      (Door lock set to LOCK)
      		Below 1 Ω


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Power Door Lock Control System Door Key Lock / Unlock Switch Circuit

  1. Inspect RHD models.

    1. Remove the front door lock assembly LH.

    2. Measure the resistance according to the value(s) in the table below.

      Standard resistance:
      Tester Connection
      		Condition
      		Specified Condition
      7 - 9
      		ON (Door lock set to LOCK)
      		Below 1 Ω
      7 - 9
      7 - 10
      		OFF (Free)
      		10 kΩ or higher
      7 - 10
      		ON (Door lock set to UNLOCK)
      		Below 1 Ω


NG
REPLACE FRONT DOOR LOCK ASSEMBLY LH
OK


2.CHECK WIRE HARNESS (FRONT DOOR LOCK RH - MAIN BODY ECU (INSTRUMENT PANEL J/B))


  1. Disconnect the IJ J/B connector.


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Power Door Lock Control System Door Key Lock / Unlock Switch Circuit

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection (Symbols)
    		Condition
    		Specified Condition
    (*1) M8-6 (L) - IJ-5
    		Always
    		Below 1 Ω
    (*1) M8-5 (UL) - IK-7
    		Always
    		Below 1 Ω
    (*1) M8-8 (E) - Body ground
    		Always
    		Below 1 Ω
    (*1) M8-6 (L) - Body ground
    		Always
    		10 kΩ or higher
    (*1) M8-5 (UL) - Body ground
    		Always
    		10 kΩ or higher
    (*2) I7-9 (L) - IK-16
    		Always
    		Below 1 Ω
    (*2) I7-10 (UL) - IJ-7
    		Always
    		Below 1 Ω
    (*2) I7-7 (E) - Body ground
    		Always
    		Below 1 Ω
    (*2) I7-9 (L) - Body ground
    		Always
    		10 kΩ or higher
    (*2) I7-10 (UL) - Body ground
    		Always
    		10 kΩ or higher
    *1: LHD
    *2: RHD


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE