Power Door Lock Control System Luggage Compartment Door Key Cylinder Switch Circuit

Body Electrical. Camry. Acv40 Gsv40
Door Lock. Camry. Acv40 Gsv40

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

READ VALUE USING INTELLIGENT TESTER

INSPECT MAIN BODY ECU (TSW TERMINAL)

INSPECT LUGGAGE COMPARTMENT DOOR LOCK CYLINDER

POWER DOOR LOCK CONTROL SYSTEM - Luggage Compartment Door Key Cylinder Switch Circuit


DESCRIPTION

When the luggage compartment door lock cylinder is turned to unlock the door by key, there is continuity between terminal TSW of the main body ECU and body ground.

WIRING DIAGRAM


Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Power Door Lock Control System Luggage Compartment Door Key Cylinder Switch Circuit


INSPECTION PROCEDURE

HINT:
Start the inspection from step 1 when using the intelligent tester and start from step 2 when not using the intelligent tester.
1.READ VALUE USING INTELLIGENT TESTER

  1. Connect the intelligent tester to the DLC3.

  1. Turn the ignition switch on and turn the intelligent tester main switch on.

  1. Select the item below in the "DATA LIST" and read the display on the intelligent tester.

    Main Body:
    Item
    		Measurement Item/Display (Range)
    		Normal Condition
    		Diagnostic Note
    Trunk Lock/Unlock SW
    		Luggage compartment door key cylinder switch/ON or OFF
    		ON: Ignition key inserted and turned to lock position
    OFF: Ignition key inserted and turned to unlock position
    		-
    OK:
    When the ignition switch is operated, the display changes as shown above.


NG
Go to step 2
OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE

2.INSPECT MAIN BODY ECU (TSW TERMINAL)


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Power Door Lock Control System Luggage Compartment Door Key Cylinder Switch Circuit

  1. Turn the ignition switch off.

  1. Disconnect the ECU connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection (Symbols)
    		Condition
    		Specified Condition
    E6-2 (TSW) - Body ground
    		Luggage compartment door lock cylinder LOCK
    		10 kΩ or higher
    E6-2 (TSW) - Body ground
    		Luggage compartment door lock cylinder OPEN
    		Below 1 Ω
    E6-2 (TSW) - Body ground
    		Luggage compartment door lock cylinder UNLOCK
    		10 kΩ or higher


NG
Go to step 3
OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE

3.INSPECT LUGGAGE COMPARTMENT DOOR LOCK CYLINDER


    Camry. Acv40 Gsv40.Door Lock.Power Door Lock Control System.Power Door Lock Control System Luggage Compartment Door Key Cylinder Switch Circuit

  1. Disconnect the luggage compartment door lock cylinder connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection (Symbols)
    		Condition
    		Specified Condition
    S6-2 - S6-1
    		Luggage compartment door lock cylinder LOCK
    		10 kΩ or higher
    S6-2 - S6-1
    		Luggage compartment door lock cylinder OPEN
    		Below 1 Ω
    S6-2 - S6-1
    		Luggage compartment door lock cylinder UNLOCK
    		10 kΩ or higher


NG
REPLACE LUGGAGE COMPARTMENT DOOR LOCK CYLINDER
OK

REPAIR OR REPLACE HARNESS OR CONNECTOR (MAIN BODY ECU, BODY GROUND - DOOR LOCK CYLINDER)