Wiper And Washer. Front Washer Motor Inspection

Body Electrical. Camry. Acv40 Gsv40

Wiper And Washer. Camry. Acv40 Gsv40

Front Washer Motor -- Inspection

1. INSPECT FRONT WASHER MOTOR

Operation Check
1. Fill the washer jar with the washer fluid.
2. Connect the positive battery (+) lead to terminal A37-1 of the windshield washer motor and pump assembly, and the negative battery (-) lead to terminal A37-2. Check that washer fluid flows from the washer jar.

2. INSPECT HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY

Operation Check
1. Fill the washer jar with the washer fluid.
2. Connect the positive battery (+) lead to terminal A38-1 of the headlight cleaner motor and pump assembly, and the negative battery (-) lead to terminal A38-2. Check that washer fluid flows from the washer jar.

3. INSPECT HEADLIGHT CLEANER CONTROL RELAY

Inspect headlight cleaner control relay operation.

Measure the resistance between terminals A39-4 (E) and A39-6 (PB).
Connect the positive (+) battery lead to terminal A39-3 (IG) of the connector, and the negative (-) battery lead to terminal A39-4 (E).

Connect the negative (-) battery lead to terminals A39-1 (HOLD) and A39-2 (H), and measure the resistance between terminals A39-4 (E) and A39-6 (PB).

Standard resistance:

Tester Connection	Condition	Specified Condition
A39-4 (E) - A39-6 (PB)	Always	10 kΩor higher
A39-4 (E) - A39-6 (PB)	When applying battery voltage	Below 1 Ω
A39-4 (E) - A39-6 (PB)	0.8 to 0.9 seconds after applying battery voltage	10 kΩ or higher

Disconnect the negative (-) battery lead from terminal A39-1 (HOLD) and A39-2 (H).
Disconnect the positive (+) battery lead from terminal A39-3 (IG), and then reconnect it.