Rear Room Light Assembly Inspection

Body Electrical. Camry. Acv40 Gsv40
Lighting. Camry. Acv40 Gsv40

  1. INSPECT NO. 1 ROOM LIGHT ASSEMBLY (w/o Sliding Roof)

  2. INSPECT SPOT LIGHT ASSEMBLY (w/ Sliding Roof)

Rear Room Light Assembly -- Inspection



1. INSPECT NO. 1 ROOM LIGHT ASSEMBLY (w/o Sliding Roof)


    Camry. Acv40 Gsv40

  1. Apply battery voltage to the No. 1 room light assembly connector.

  1. Check that the interior light comes on.

    OK:
    Measurement Condition
    		Switch Condition
    		Specified Condition
    Battery positive (+) → Terminal 1
    Battery negative (-) → Terminal 2
    		DOOR
    		Interior light comes on
    Battery positive (+) → Terminal 1
    Battery negative (-) → Terminal 3
    		ON
    		Interior light comes on
    If the result is not as specified, replace the bulb or room light assembly.


2. INSPECT SPOT LIGHT ASSEMBLY (w/ Sliding Roof)


    Camry. Acv40 Gsv40.Lighting.Lighting System.Rear Room Light Assembly Inspection

  1. Apply battery voltage to the spot light assembly connector.

  1. Check that the rear personal light comes on.

    OK:
    Measurement Condition
    		Switch Condition
    		Specified Condition
    Battery positive (+) → Terminal Q10-2
    Battery negative (-) → Terminal Q10-4
    		Pushed (ON)
    		Rear RH personal light comes on
    Battery positive (+) → Terminal Q10-2
    Battery negative (-) → Terminal Q10-3
    		Always
    		Rear RH personal light comes on
    Battery positive (+) → Terminal Q11-2
    Battery negative (-) → Terminal Q11-4
    		Pushed (ON)
    		Rear LH personal light comes on
    Battery positive (+) → Terminal Q11-2
    Battery negative (-) → Terminal Q11-5
    		Always
    		Rear LH personal light comes on
    If the result is not as specified, replace the bulb or spot light assembly.