Engine Hood Courtesy Switch Removal

Securities. Camry. Acv40 Gsv40
Theft Deterrent. Camry. Acv40 Gsv40

  1. REMOVE COOL AIR INTAKE DUCT SEAL (for 2GR-FE)

  2. REMOVE FRONT BUMPER ASSEMBLY

  3. REMOVE HIGH PITCHED HORN ASSEMBLY

  4. REMOVE HOOD LOCK ASSEMBLY

Engine Hood Courtesy Switch -- Removal



1. REMOVE COOL AIR INTAKE DUCT SEAL (for 2GR-FE)


    Camry. Acv40 Gsv40

  1. Remove the 7 clips and cool air intake duct seal.



2. REMOVE FRONT BUMPER ASSEMBLY


    Camry. Acv40 Gsv40.Theft Deterrent.Theft Deterrent System (W/ Entry And Start System).Engine Hood Courtesy Switch Removal

  1. Put protective tape around the front bumper assembly.



    Camry. Acv40 Gsv40.Theft Deterrent.Theft Deterrent System (W/ Entry And Start System).Engine Hood Courtesy Switch Removal

  1. Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

    HINT:
    Use the same procedure for the RH side and LH side.


    Camry. Acv40 Gsv40

  1. Remove the 8 screws, 2 clips, 2 radiator grille protectors and bolt.



    Camry. Acv40 Gsv40

  1. Disengage the 2 claws and disconnect the front bumper assembly as shown in the illustration.

    HINT:
    Use the same procedure for the RH side and LH side.

  1. Disconnect each connector.

  1. w/ TOYOTA Parking Assist-sensor System:

    1. Disengage the clamp and disconnect the No. 1 ultrasonic sensor connector.

  1. w/ Headlight Cleaner System:

    1. Disconnect the headlight cleaner washer hose.



    Camry. Acv40 Gsv40

  1. Remove the front bumper assembly.



3. REMOVE HIGH PITCHED HORN ASSEMBLY


    Camry. Acv40 Gsv40

  1. Disconnect the connector.

  1. Remove the bolt and the high pitched horn assembly.



4. REMOVE HOOD LOCK ASSEMBLY


    Camry. Acv40 Gsv40

  1. Disconnect the connector.

  1. Remove the 3 bolts.



    Camry. Acv40 Gsv40

  1. Disconnect the hood lock control cable.

  1. Remove the hood lock assembly.