Theft Deterrent System (W/O Entry And Start System) Ecu Power Source Circuit

Securities. Camry. Acv40 Gsv40
Theft Deterrent. Camry. Acv40 Gsv40

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY (MAIN BODY ECU) (POWER SOURCE)

CHECK HARNESS AND CONNECTOR (INSTRUMENT PANEL J/B - BODY GROUND)

THEFT DETERRENT SYSTEM (w/o Entry and Start System) - ECU Power Source Circuit


DESCRIPTION

This circuit provides power for main body ECU operation.

WIRING DIAGRAM


Camry. Acv40 Gsv40.Theft Deterrent.Theft Deterrent System (W/ Entry And Start System).Theft Deterrent System (W/O Entry And Start System) Ecu Power Source Circuit


INSPECTION PROCEDURE

1.CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY (MAIN BODY ECU) (POWER SOURCE)


    Camry. Acv40 Gsv40.Theft Deterrent.Theft Deterrent System (W/ Entry And Start System).Theft Deterrent System (W/O Entry And Start System) Ecu Power Source Circuit

  1. Disconnect the ID J/B connector.

  1. Measure the voltage according to the value(s) in the table below.

    Standard voltage:
    Tester Connection
    		Specified Condition
    ID-10 - Body ground
    		10 to 14 V


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK


2.CHECK HARNESS AND CONNECTOR (INSTRUMENT PANEL J/B - BODY GROUND)


    Camry. Acv40 Gsv40.Theft Deterrent.Theft Deterrent System (W/ Entry And Start System).Theft Deterrent System (W/O Entry And Start System) Ecu Power Source Circuit

  1. Disconnect the IF and IM J/B connectors.

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Symbol (Tester Connection)
    		Specified Condition
    IF-10 - Body ground
    		Below 1 Ω
    IM-9 - Body ground


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE