Occupant Detection Sensor (For Manual Seat) Removal

Move the front seat assembly fully forward by operating the slide handle.

Using a screwdriver, disengage the 4 claws and remove the seat track cover RH.

HINT:

Tape the screwdriver tip before use.

Using a screwdriver, disengage the 4 claws and remove the inner seat track bracket cover RH.

HINT:

Tape the screwdriver tip before use.

Move the front seat assembly to the rearmost position by operating the slide handle.

Remove the 2 bolts on the front seat track bracket.

Move the front seat assembly fully forward by operating the slide handle.

Remove the 2 bolts on the rear seat track bracket.

Move the front seat assembly to the center position and adjust the seatback to the vertical position by operating the slide and reclining adjuster release handle.

Disconnect the connectors and clamp.

Remove the front seat assembly RH.

Lift the reclining adjuster release handle.

Using a screwdriver, disengage the claw and remove the reclining adjuster release handle.

HINT:

Tape the screwdriver tip before use.

Disengage the 2 hooks.

Remove the 2 screws.

Disengage the 4 claws and remove the front seat cushion shield RH.

for Driver seat:

1. Disconnect the connectors and disengage the 4 clamps.
   

for Passenger seat:

1. Disconnect the connector and disengage the 3 clamps.
   

Remove the nut and front seat inner belt assembly.

Remove the screw.

Disengage the claw and clip, and then remove the front inner seat cushion shield RH.

Disengage the clamps.

Disengage the hooks and remove the separate type front seat cushion cover with pad.

Remove the 16 hog rings and separate type front seat cushion pad from the separate type front seat cushion cover.