Ambient Temperature Sensor Removal

Heater & Air Conditioning System. Camry. Acv40 Gsv40
Air Conditioning. Camry. Acv40 Gsv40

  1. REMOVE COOL AIR INTAKE DUCT SEAL (for 2GR-FE)

  2. REMOVE FRONT BUMPER ASSEMBLY (w/o Headlight Cleaner System)

  3. REMOVE FRONT BUMPER ASSEMBLY (w/ Headlight Cleaner System)

  4. REMOVE AMBIENT TEMPERATURE SENSOR

Ambient Temperature Sensor -- Removal



1. REMOVE COOL AIR INTAKE DUCT SEAL (for 2GR-FE)


    Camry. Acv40 Gsv40

  1. Remove the 7 clips and cool air intake duct seal.



2. REMOVE FRONT BUMPER ASSEMBLY (w/o Headlight Cleaner System)


    Camry. Acv40 Gsv40.Air Conditioning.Air Conditioning System.Ambient Temperature Sensor Removal

  1. Put protective tape around the front bumper assembly.



    Camry. Acv40 Gsv40.Air Conditioning.Air Conditioning System.Ambient Temperature Sensor Removal

  1. Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

    HINT:
    Use the same procedure for the RH side and LH side.


    Camry. Acv40 Gsv40

  1. Remove the 8 screws, 2 clips, 2 radiator grille protectors and bolt.



    Camry. Acv40 Gsv40

  1. Disengage the 2 claws and disconnect the front bumper assembly as shown in the illustration.

    HINT:
    Use the same procedure for the RH side and LH side.

  1. Disconnect 2 fog light connectors.

  1. w/ TOYOTA Parking Assist-sensor System:

    1. Disengage the clamp and disconnect the clearance sonar connector.

  1. Remove the front bumper assembly.



3. REMOVE FRONT BUMPER ASSEMBLY (w/ Headlight Cleaner System)


    Camry. Acv40 Gsv40.Air Conditioning.Air Conditioning System.Ambient Temperature Sensor Removal

  1. Put protective tape around the front bumper assembly.



    Camry. Acv40 Gsv40.Air Conditioning.Air Conditioning System.Ambient Temperature Sensor Removal

  1. Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

    HINT:
    Use the same procedure for the RH side and LH side.


    Camry. Acv40 Gsv40

  1. Remove the 8 screws, 2 clips, 2 radiator grille protectors and bolt.



    Camry. Acv40 Gsv40

  1. Disengage the 2 claws and disconnect the front bumper assembly as shown in the illustration.

    HINT:
    Use the same procedure for the RH side and LH side.

  1. Disconnect 2 fog light connectors.

  1. w/ TOYOTA Parking Assist-sensor System:

    1. Disengage the clamp and disconnect the clearance sonar connector.



    Camry. Acv40 Gsv40

  1. Disconnect the headlight cleaner washer hose, and then remove the front bumper assembly.



4. REMOVE AMBIENT TEMPERATURE SENSOR


    Camry. Acv40 Gsv40

  1. Disconnect the connector and detach the clamp.

  1. Remove the ambient temperature sensor.