Steering Column Assembly Reassembly

Engage the 2 claws to install the ignition or starter switch assembly to the steering lock sub-assembly.

Install the key interlock solenoid to the steering lock sub-assembly with the 2 screws.

Engage the 2 claws to install the un-lock warning switch assembly to the steering lock sub-assembly.

Make sure that the ignition switch lock cylinder assembly is in the ACC position.

Install the ignition switch lock cylinder assembly to the steering lock sub-assembly.

Make sure that the ignition switch lock cylinder assembly is securely installed.

Check that the steering lock mechanism is activated when the key is removed.

Check that the steering lock mechanism is deactivated when the key is inserted and turned to the ACC position.

HINT:

If there is any abnormality, replace the ignition switch lock cylinder assembly.

Temporarily install the assembled steering lock and its bracket to the steering column assembly using 2 new tapered-head bolts.

Tighten the 2 tapered-head bolts until the bolt heads break off.

Align the transponder key amplifier with the upper bracket. Tilt the amplifier slightly and slide it into position.

Push the transponder key amplifier to install it to the upper bracket.

NOTICE:

Do not push the amplifier with excessive force.

Temporarily install the steering lock actuator assembly and the steering lock bracket with 2 new tapered-head bolts.

Tighten the 2 tapered-head bolts until the bolt heads break off.