Parking Brake Pedal Removal

Brake. Camry. Acv40 Gsv40
Parking Brake. Camry. Acv40 Gsv40

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE FRONT DOOR SCUFF PLATE LH

  4. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH

  5. REMOVE FRONT DOOR SCUFF PLATE RH

  6. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

  7. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH

  8. REMOVE NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (for RHD)

  9. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (for RHD)

  10. REMOVE INSTRUMENT CLUSTER FINISH PANEL NO.1 (for RHD)

  11. REMOVE COMBINATION METER ASSEMBLY (for RHD)

  12. REMOVE INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY

  13. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY

  14. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

  15. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  16. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  17. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY

  18. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY

  19. REMOVE LOWER INSTRUMENT CLUSTER FINISH PANEL CENTER SUB-ASSEMBLY

  20. REMOVE CONSOLE BOX POCKET

  21. REMOVE CONSOLE BOX CARPET

  22. REMOVE CONSOLE BOX ASSEMBLY

  23. REMOVE NO. 2 CONSOLE BOX INSERT FRONT

  24. REMOVE NO. 1 CONSOLE BOX INSERT FRONT

  25. REMOVE NO. 1 CONSOLE BOX DUCT (w/ Rear Register Duct)

  26. REMOVE FLOOR CARPET BRACKET LH

  27. REMOVE FLOOR CARPET BRACKET RH

  28. REMOVE YAW RATE AND ACCELERATION SENSOR (w/ VSC)

  29. REMOVE FLOOR SHIFT LEVER ASSEMBLY

  30. REMOVE CENTER AIRBAG SENSOR ASSEMBLY

  31. DISCONNECT NO. 4 PARKING BRAKE CABLE ASSEMBLY

  32. REMOVE PARKING BRAKE PEDAL ASSEMBLY (for LHD)

  33. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY (for RHD)

  34. REMOVE PARKING BRAKE PEDAL ASSEMBLY (for RHD)

Parking Brake Pedal -- Removal



1. PRECAUTION
(CAMRY_ACV40 RM0000024DB001X.html)


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment. (CAMRY_ACV40 RM000000KT1054X.html)


3. REMOVE FRONT DOOR SCUFF PLATE LH


    Camry. Acv40 Gsv40

  1. Disengage the 7 claws and 3 clips, and remove the front door scuff plate LH.



4. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH


    Camry. Acv40 Gsv40.Parking Brake.Parking Brake System.Parking Brake Pedal Removal

  1. Remove the cowl side trim clip.

  1. Disengage the 2 clips and remove the cowl side trim sub-assembly LH.



5. REMOVE FRONT DOOR SCUFF PLATE RH
HINT:
Use the same procedures for the RH side and the LH side.


6. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
HINT:
Use the same procedures for the RH side and the LH side.


7. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH


    Camry. Acv40 Gsv40.Parking Brake.Parking Brake System.Parking Brake Pedal Removal

  1. Remove the bolt <A> and the screw <B>.

  1. Disengage the 2 claws and the DLC3.

  1. Disconnect the hood lock control cable assembly.

  1. Disengage the claw and the 4 clips.

  1. Remove the air hose, disconnect the connector, and then remove the lower instrument panel finish panel LH.



8. REMOVE NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (for RHD)


    Camry. Acv40 Gsv40

  1. Disengage the 3 claws and the 2 clips.

  1. Disconnect each connector and remove the instrument panel sub-assembly.



9. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (for RHD)


    Camry. Acv40 Gsv40

  1. Disengage the 2 claws and 2 clips, and then remove the lower instrument panel finish panel.



10. REMOVE INSTRUMENT CLUSTER FINISH PANEL NO.1 (for RHD)


    Camry. Acv40 Gsv40.Parking Brake.Parking Brake System.Parking Brake Pedal Removal

  1. Remove the 2 clips.

  1. Disengage the guide and 4 claws and then remove the instrument cluster finish panel.



11. REMOVE COMBINATION METER ASSEMBLY (for RHD)


    Camry. Acv40 Gsv40.Parking Brake.Parking Brake System.Parking Brake Pedal Removal

  1. Remove the 4 screws <E>.

  1. Disconnect each connector and remove the combination meter assembly.



12. REMOVE INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY


    Camry. Acv40 Gsv40.Parking Brake.Parking Brake System.Parking Brake Pedal Removal

  1. Disengage the 4 claws.

  1. Disengage the 2 guides and remove the No. 2 under cover sub-assembly.



13. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY

  1. Remove the bolt <A>.



    Camry. Acv40 Gsv40.Parking Brake.Parking Brake System.Parking Brake Pedal Removal

  1. Remove the 4 screws <B>.

  1. Disengage the 3 claws and 3 clips, and then remove the lower instrument panel sub-assembly.



14. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    Camry. Acv40 Gsv40

  1. Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.



15. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH


    Camry. Acv40 Gsv40

  1. Disengage the 2 clips and remove the No. 1 instrument cluster finish panel garnish.



16. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH


    Camry. Acv40 Gsv40

  1. Disengage the 2 clips and remove the No. 2 instrument cluster finish panel garnish.



17. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY


    Camry. Acv40 Gsv40

  1. Disengage the 6 claws and the 3 clips, and then remove the floor shift position indicator housing sub-assembly.

  1. with Seat Heater System:

    1. Disconnect each connector.



18. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY


    Camry. Acv40 Gsv40.Parking Brake.Parking Brake System.Parking Brake Pedal Removal

  1. Disengage the 3 claws and the 5 clips.

  1. Disengage the clamp.

  1. Disconnect the connector and remove the upper console rear panel sub-assembly.



19. REMOVE LOWER INSTRUMENT CLUSTER FINISH PANEL CENTER SUB-ASSEMBLY


    Camry. Acv40 Gsv40.Parking Brake.Parking Brake System.Parking Brake Pedal Removal

  1. Remove the 2 screws <F>.

  1. Disengage the 4 claws.

  1. Disconnect each connector and remove the instrument cluster finish panel center sub-assembly.

    HINT:
    Set the shift lever in the D position.


20. REMOVE CONSOLE BOX POCKET

  1. Remove the console box pocket.



21. REMOVE CONSOLE BOX CARPET


    Camry. Acv40 Gsv40

  1. Remove the console box carpet.



22. REMOVE CONSOLE BOX ASSEMBLY


    Camry. Acv40 Gsv40.Parking Brake.Parking Brake System.Parking Brake Pedal Removal

  1. Remove the 2 screws <F>.



    Camry. Acv40 Gsv40.Parking Brake.Parking Brake System.Parking Brake Pedal Removal

  1. Remove the 2 bolts <G> and the console box assembly.



23. REMOVE NO. 2 CONSOLE BOX INSERT FRONT


    Camry. Acv40 Gsv40.Parking Brake.Parking Brake System.Parking Brake Pedal Removal

  1. Remove the 3 screws <F>.

  1. Disengage the clip and remove the No. 2 console box insert front.



24. REMOVE NO. 1 CONSOLE BOX INSERT FRONT


    Camry. Acv40 Gsv40.Parking Brake.Parking Brake System.Parking Brake Pedal Removal

  1. Remove the 3 screws <F>.

  1. Disengage the clip and remove the No. 1 console box insert front.



25. REMOVE NO. 1 CONSOLE BOX DUCT (w/ Rear Register Duct)


    Camry. Acv40 Gsv40

  1. Remove the clip and No. 1 console box duct.



26. REMOVE FLOOR CARPET BRACKET LH


    Camry. Acv40 Gsv40.Parking Brake.Parking Brake System.Parking Brake Pedal Removal

  1. Release the clamp.

  1. Turn back the floor carpet.



    Camry. Acv40 Gsv40

  1. Remove the 3 clips.

  1. Remove the floor carpet bracket LH.



27. REMOVE FLOOR CARPET BRACKET RH


    Camry. Acv40 Gsv40.Parking Brake.Parking Brake System.Parking Brake Pedal Removal

  1. Release the clamp.

  1. Turn back the floor carpet.



    Camry. Acv40 Gsv40

  1. Remove the 3 clips.

  1. Remove the floor carpet bracket RH.



28. REMOVE YAW RATE AND ACCELERATION SENSOR (w/ VSC)


    Camry. Acv40 Gsv40

  1. Disconnect the yaw rate and acceleration sensor connector.

  1. Remove the 2 bolts and yaw rate and acceleration sensor.

    NOTICE:
    Do not remove the yaw rate and acceleration sensor from the bracket.


29. REMOVE FLOOR SHIFT LEVER ASSEMBLY


    Camry. Acv40 Gsv40

  1. Remove the 4 bolts and the floor shift lever assembly.



30. REMOVE CENTER AIRBAG SENSOR ASSEMBLY

  1. Turn back the carpet.



    Camry. Acv40 Gsv40

  1. Disconnect the holder (with connectors).

  1. Remove the 3 bolts and center airbag sensor assembly.



31. DISCONNECT NO. 4 PARKING BRAKE CABLE ASSEMBLY


    Camry. Acv40 Gsv40.Parking Brake.Parking Brake System.Parking Brake Pedal Removal

  1. Using a wrench, hold the lock nut and loosen the turnbuckle.

  1. Disconnect the No. 4 parking brake cable assembly from the No. 1 parking brake cable assembly.



32. REMOVE PARKING BRAKE PEDAL ASSEMBLY (for LHD)


    Camry. Acv40 Gsv40

  1. Using needle-nose pliers, remove the clip from the No. 1 parking brake cable assembly.



  1. Remove the bolt, nut, and the No. 1 parking brake cable clamp.


    Camry. Acv40 Gsv40.Parking Brake.Parking Brake System.Parking Brake Pedal Removal

  1. Separate the No. 1 parking brake cable assembly from the body.



    Camry. Acv40 Gsv40

  1. Disconnect the parking brake switch connector.

  1. Remove the bolt, 2 nuts, and the parking brake pedal assembly with the No. 1 parking brake cable assembly from the body.



33. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY (for RHD)


    Camry. Acv40 Gsv40

  1. Disengage the 3 claws and remove the No. 1 air duct sub-assembly.



34. REMOVE PARKING BRAKE PEDAL ASSEMBLY (for RHD)


    Camry. Acv40 Gsv40

  1. Using needle-nose pliers, remove the clip from the No. 1 parking brake cable assembly.



    Camry. Acv40 Gsv40

  1. Remove the bolt.



    Camry. Acv40 Gsv40

  1. Disconnect the parking brake switch connector.

  1. Remove the bolt, 2 nuts, and the parking brake pedal assembly with the No. 1 parking brake cable assembly from the body.