Skid Control Sensor Removal

Brake. Camry. Acv40 Gsv40
Brake Control. Camry. Acv40 Gsv40

  1. REMOVE REAR WHEEL

  2. DISCONNECT SKID CONTROL SENSOR WIRE

  3. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY

  4. REMOVE REAR DISC

  5. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY WITH SKID CONTROL SENSOR

Skid Control Sensor -- Removal


HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The procedures listed below are for the LH side.
  3. The skid control sensor is a component of the rear axle hub and bearing assembly. If the skid control sensor needs to be replaced, replace the rear axle hub and bearing assembly.
  4. If the sensor rotor needs to be replaced, replace it together with the rear axle hub and bearing assembly.


1. REMOVE REAR WHEEL


2. DISCONNECT SKID CONTROL SENSOR WIRE


    Camry. Acv40 Gsv40

  1. Disconnect the skid control sensor wire from the skid control sensor.

    NOTICE:
    Be careful not to damage the skid control sensor.


3. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY


    Camry. Acv40 Gsv40.Brake Control.Anti-Lock Brake System.Skid Control Sensor Removal

  1. Remove the bolt and separate the flexible hose from the shock absorber.



    Camry. Acv40 Gsv40.Brake Control.Anti-Lock Brake System.Skid Control Sensor Removal

  1. Remove the 2 bolts and separate the rear disc brake caliper assembly.

    NOTICE:
    Use wire or an equivalent tool to keep the brake caliper from hanging down by the flexible hose.


4. REMOVE REAR DISC


    Camry. Acv40 Gsv40.Brake Control.Anti-Lock Brake System.Skid Control Sensor Removal

  1. Put matchmarks on the rear disc and the axle hub.



    Camry. Acv40 Gsv40.Brake Control.Anti-Lock Brake System.Skid Control Sensor Removal

  1. Release the parking brake and remove the rear disc.

    HINT:
    If the disc cannot be removed easily, turn and press firmly the shoe adjuster until the wheel comes free.


5. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY WITH SKID CONTROL SENSOR

  1. Remove the rear axle hub and bearing assembly with skid control sensor (CAMRY_ACV40 RM000001IXL002X_02_0005.html).

    HINT:
    1. The skid control sensor is a component of the rear axle hub and bearing assembly. If the skid control sensor needs to be replaced, replace the rear axle hub and bearing assembly.
    2. If the sensor rotor needs to be replaced, replace it together with the rear axle hub and bearing assembly.