REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (w/o Entry and Start System)
REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (w/ Entry and Start System)
Skid Control Buzzer (W/ Vsc) -- Removal |
| 1. REMOVE FRONT DOOR SCUFF PLATE LH |
Disengage the 7 claws and 3 clips, and remove the front door scuff plate LH.
 |
| 2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH |
Remove the cowl side trim clip.
 |
Disengage the 2 clips and remove the cowl side trim sub-assembly LH.
| 3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH |
Remove the bolt <A> and the screw <B>.
 |
Disengage the 2 claws and the DLC3.
Disconnect the hood lock control cable assembly.
Disengage the claw and the 4 clips.
Remove the air hose, disconnect the connector, and then remove the lower instrument panel finish panel LH.
| 4. REMOVE NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY |
Disengage the 3 claws and the 2 clips.
 |
Disconnect each connector and remove the instrument panel sub-assembly.
| 5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (w/o Entry and Start System) |
Disengage the 2 claws and 2 clips, and then remove the lower instrument panel finish panel.
 |
| 6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (w/ Entry and Start System) |
Disengage the 2 claws and 2 clips, and then remove the lower instrument panel finish panel.
 |
Disconnect the connector.
| 7. REMOVE SKID CONTROL BUZZER |
Disconnect the skid control buzzer connector.
 |
Remove the clip and skid control buzzer.