Rear Axle Hub Bolt Replacement

Remove the bolt and separate the flexible hose from the shock absorber.

Remove the 2 bolts and separate the rear disc brake caliper assembly.

NOTICE:

Use wire or an equivalent tool to keep the brake caliper from hanging down by the flexible hose.

Put matchmarks on the rear disc and the axle hub.

Release the parking brake and remove the rear disc.

HINT:

If the disc cannot be removed easily, turn and press firmly the shoe adjuster until the wheel comes free.

Temporarily install the 2 nuts and washers to the rear axle hub bolt as shown in the illustration.

Using SST and a brass bar or an equivalent tool to hold the hub and bearing assembly, remove the rear axle hub bolt.

SST

09628-10011

Install a washer and nut to a new bolt as shown in the illustration.

Using a brass bar or an equivalent tool to hold the hub and bearing assembly, install the rear axle hub bolt by tightening the nut.

Aligning the matchmarks, install the rear disc.

HINT:

When replacing the rear disc with a new one, select the installation position where the rear disc has the minimum runout.

Install the rear disc brake caliper with the 2 bolts.

Torque:

62 N*m{630 kgf*cm, 46 ft.*lbf}

NOTICE:

Do not twist the brake hose when installing the rear disc brake caliper assembly LH.

Install the rear flexible hose with the bolt.

Torque:

19 N*m{192 kgf*cm, 14 ft.*lbf}