Floor Shift Lever Assembly Removal

Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.

Disengage the 2 clips and remove the No. 1 instrument cluster finish panel garnish.

Disengage the 2 clips and remove the No. 2 instrument cluster finish panel garnish.

Open the lid of the upper console panel.

Apply protective tape to the area shown in the illustration.

Using a moulding remover, disengage the 2 claws and the 5 clips, and then remove the upper console panel as shown in the illustration.

with Seat Heater System:

1. Disconnect each connector.
   

Disengage the 3 claws and the 5 clips, and remove the upper console rear panel sub-assembly.

Remove the 2 clips and disconnect the end of the transmission control cable.

Pull out the control cable assembly locks.

Turn the adjust nut 180° clockwise. While holding the adjust nut, separate the control cable assembly.

Remove the 4 bolts and shift lever assembly.