Transmission. Camry. Acv40 Gsv40
U660E Automatic Transaxle. Camry. Acv40 Gsv40
Oil Pump -- Reassembly |
| 1. INSTALL FRONT OIL PUMP OIL SEAL |
Using SST and a hammer, install a new oil seal to the oil pump body.
- SST
- 09350-32014(09351-32140)
- NOTICE:
- The seal end should be level with the outer edge of the oil pump.
 |
Coat the lip of the oil seal with MP grease.
| 2. INSTALL FRONT OIL PUMP BODY O-RING |
Coat a new O-ring with ATF and install it to the oil pump body.
- NOTICE:
- Ensure that the O-ring is not twisted.
 |
| 3. INSTALL FRONT OIL PUMP DRIVEN GEAR |
Coat the front oil pump driven gear with ATF and install it to the oil pump body with the marked side up.
 |
| 4. INSTALL FRONT OIL PUMP DRIVE GEAR |
Coat the front oil pump drive gear with ATF, and install it to the oil pump body with the marked side up.
 |
| 5. INSTALL STATOR SHAFT ASSEMBLY |
Align each knock pin of the stator shaft with the holes in the oil pump body and install the stator shaft to the oil pump body with the 16 bolts.
 |
Using a "TORX" socket (T30), install the 11 bolts.
- Torque:
- 9.3 N*m{95 kgf*cm, 82 in.*lbf}
-
-Bolt length:
Bolt length:Bolt A
Bolt A14 mm (0.55 in) Bolt B
Bolt B26 mm (1.02 in)
| 6. INSPECT FRONT OIL PUMP AND GEAR BODY SUB-ASSEMBLY |
Turn the drive gear with 2 screwdrivers and make sure that it rotates smoothly.
- NOTICE:
- Be careful not to damage the oil seal lip.
 |