Shift Lock System On-Vehicle Inspection

Transmission. Camry. Acv40 Gsv40
U660E Automatic Transaxle. Camry. Acv40 Gsv40

  1. CHECK SHIFT LOCK OPERATION

  2. CHECK SHIFT LOCK RELEASE BUTTON OPERATION

  3. CHECK KEY INTERLOCK OPERATION

  4. INSPECT SHIFT LOCK CONTROL UNIT ASSEMBLY

Shift Lock System -- On-Vehicle Inspection



1. CHECK SHIFT LOCK OPERATION

  1. Move the shift lever to the P position.

  1. Turn the ignition switch off.

  1. Check that the shift lever cannot be moved to any position other than P.

  1. Turn the ignition switch on (IG), depress the brake pedal and check that the shift lever can be moved to another position.
    If operation cannot be done as specified, inspect the shift lock control unit.



2. CHECK SHIFT LOCK RELEASE BUTTON OPERATION

  1. Using a screwdriver, remove the shift lock release cover.

  1. When operating the shift lever with the shift lock release button pressed, check that the lever can be moved to any position other than P.
    If operation cannot be done as specified, check the shift lever assembly installation condition.



3. CHECK KEY INTERLOCK OPERATION

  1. Turn the ignition switch to the ON position.

  1. Depress the brake pedal and move the shift lever to any position other than P.

  1. Check that the ignition key cannot be turned to the LOCK position.

  1. Move the shift lever to the P position, turn the ignition key to the LOCK position and check that the ignition key can be removed.
    If operation cannot be done as specified, inspect the shift lock control unit.



4. INSPECT SHIFT LOCK CONTROL UNIT ASSEMBLY


    Camry. Acv40 Gsv40.U660E Automatic Transaxle.Automatic Transaxle System.Shift Lock System On-Vehicle Inspection

  1. Measure the voltage according to the value(s) in the table below.

    HINT:
    Do not disconnect the shift lock control unit assembly connector.

    Standard voltage:

    Terminal
    		Measuring Condition
    		Voltage (V)
    6 (ACC) - 1 (E)
    		Ignition switch ON
    		10 to 14
    6 (ACC) - 1 (E)
    		Ignition switch ACC
    		10 to 14
    6 (STP) - 1 (E)
    		Ignition switch OFF
    		Below 1
    4 (STP) - 1 (E)
    		Brake pedal depressed
    		10 to 14
    4 (STP) - 1 (E)
    		Brake pedal released
    		Below 1
    5 (KLS+) - 1 (E)
    1. 1. Ignition switch ACC and shift lever P position
    2. 2. Ignition switch ACC and shift lever except P position
    3. 3. Ignition switch ACC and shift lever P position (After approx. 1 second)
    1. 7.5 to 11
    2. Below 1
    3. 6 to 9
    8 (IG) - 1 (E)
    		Ignition switch ON
    		10 to 14
    8 (IG) - 1 (E)
    		Ignition switch OFF
    		Below 1


    Camry. Acv40 Gsv40.U660E Automatic Transaxle.Automatic Transaxle System.Shift Lock System On-Vehicle Inspection

  1. Measure the resistance according to the value(s) in the table below.

    HINT:
    Do not disconnect the shift lock control unit assembly connector.
    If the result is not as specified, replace the shift lever assembly.

    Standard resistance:

    Terminal
    		Measuring Condition
    		Specified Value
    1 (E) - Body ground
    		Always
    		Below 1 Ω