Transmission Wire Installation

Coat a new O-ring of the transmission wire connector with ATF WS and install it to the transmission wire.

Install the transmission wire with the bolt.

Torque:

5.4 N*m{55 kgf*cm, 48 in.*lbf}

Connect the transmission wire connector.

Coat the O-ring of the ATF WS temperature sensor with ATF.

Install the ATF temperature sensor with the lock plate and bolt.

Torque:

6.6 N*m{67 kgf*cm, 58 in.*lbf}

Connect the 7 shift solenoid valve connectors.

Install the 2 magnets in the oil pan.

Apply adhesive or equivalent to new 18 bolts.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

Using a new gasket, install the oil pan to the transaxle case with the 18 bolts.

Torque:

7.8 N*m{80 kgf*cm, 69 in.*lbf}

NOTICE:

Since the bolts should be seal bolts, apply adhesive to the bolts and tighten them within 10 minutes of application.