Starter Disassembly

Remove the nut and disconnect the lead wire from terminal C.

Remove the 2 screws that hold the magnetic switch to the motor terminal starter kit.

Remove the repair service starter kit.

Remove the return spring and the plunger from the repair service starter kit.

Remove the 2 through bolts and pull out the starter yoke assembly together with the starter commutator end frame assembly.

Remove the starter yoke assembly from the starter commutator end frame assembly.

Remove the starter armature plate from the starter yoke assembly.

Using a screwdriver, remove the starter commutator end frame cover.

Using snap ring pliers, remove the snap ring and plate washer.

Remove the starter armature assembly from the commutator end frame assembly.

Remove the 3 planetary gears from the motor terminal starter kit.