Oil Filter Replacement

Engine. Camry. Acv40 Gsv40
2Az-Fe Lubrication. Camry. Acv40 Gsv40

  1. DRAIN ENGINE OIL

  2. REMOVE OIL FILTER SUB-ASSEMBLY

  3. INSTALL OIL FILTER SUB-ASSEMBLY

  4. ADD ENGINE OIL

  5. CHECK FOR ENGINE OIL LEAKS

Oil Filter -- Replacement


CAUTION:
  1. Prolonged and repeated contact with engine oil will cause the loss of natural oils from the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains potentially harmful contaminants which may cause skin cancer.
  2. Precautions should be taken when replacing engine oil to minimize the risk of your skin making contact with used engine oil. Wear protective clothing and gloves. Wash your skin thoroughly with soap and water, or use a waterless hand cleaner to remove any used engine oil. Do not use gasoline, thinners or solvents.
  3. For environmental protection, used oil and used oil filters must be disposed of at designated disposal sites.


1. DRAIN ENGINE OIL

  1. Remove the oil filler cap.

  1. Remove the oil drain plug and drain the oil into a container.



2. REMOVE OIL FILTER SUB-ASSEMBLY


    Camry. Acv40 Gsv40.2Az-Fe Lubrication.Lubrication System.Oil Filter Replacement

  1. Using SST, remove the oil filter.

    SST
    09228-06501


3. INSTALL OIL FILTER SUB-ASSEMBLY

  1. Check and clean the oil filter installation surface.

  1. Apply clean engine oil to the gasket of a new oil filter.



    Camry. Acv40 Gsv40.2Az-Fe Lubrication.Lubrication System.Oil Filter Replacement

  1. Lightly screw the oil filter into place by hand. Tighten it until the gasket contacts the seat.

  1. Using SST, tighten the oil filter.

    SST
    09228-06501

    1. Depending on the work space available, choose from the following.
      1. If enough space is available, use a torque wrench to tighten the oil filter.

      Torque:
      13 N*m{133 kgf*cm, 10 ft.*lbf}
      2. If enough space is not available to use a torque wrench, tighten the oil filter a 3/4 turn by hand or use a common wrench.


4. ADD ENGINE OIL

  1. Clean and install the oil drain plug with a new gasket.

    Torque:
    25 N*m{255 kgf*cm, 18 ft.*lbf}

  1. Add new oil.

    Standard capacity:
    Item
    		Standard Condition
    Drain and refill with oil filter change
    		4.3 liters (4.5 US qts, 3.8 Imp. qts)
    Drain and refill without oil filter change
    		4.1 liters (4.3 US qts, 3.6 Imp. qts)
    Dry fill
    		5.0 liters (5.3 US qts, 4.4 Imp. qts)

  1. Install the oil filler cap.



5. CHECK FOR ENGINE OIL LEAKS