Drive Belt Installation

Engine. Camry. Acv40 Gsv40
2Az-Fe Engine Mechanical. Camry. Acv40 Gsv40

  1. INSTALL V-RIBBED BELT

  2. INSTALL FRONT FENDER APRON SEAL RH

  3. INSTALL ENGINE UNDER COVER RH

  4. INSTALL FRONT WHEEL RH

Drive Belt -- Installation



1. INSTALL V-RIBBED BELT


    Camry. Acv40 Gsv40.2Az-Fe Engine Mechanical.Engine.Drive Belt Installation

  1. Using SST and 19 mm socket wrench, loosen the V-ribbed belt tensioner arm clockwise, then install the V-ribbed belt.

    SST
    09216-42010
    NOTICE:
    1. Be sure to connect SST and the tools so that they are in line during use.
    2. When retracting the tensioner, turn it clockwise slowly for 3 seconds or more. Do not apply force rapidly.
    3. After the tensioner is fully retracted, do not apply force any more than necessary.

  1. After installing the V-ribbed belt, check that it fits properly in the ribbed grooves. Check to confirm that the belt has not slipped out of the grooves on the bottom of the crank pulley by hand.



2. INSTALL FRONT FENDER APRON SEAL RH


3. INSTALL ENGINE UNDER COVER RH


4. INSTALL FRONT WHEEL RH
Torque:
103 N*m{1,050 kgf*cm, 76 ft.*lbf}