Camshaft Position Sensor Installation

Apply a light coat of engine oil to the O-ring of the sensor.

NOTICE:

Make sure that the O-ring is not cracked or jammed when installing it.

Install the sensor with the bolt.

Torque:

9.0 N*m{90 kgf*cm, 80 in.*lbf}

Connect the sensor connector.

Install the air cleaner filter element onto the air cleaner case.

Insert the hinges. Install the air cleaner cap sub-assembly with the 2 bolts.

Align the matchmarks of the No. 1 air cleaner hose and throttle body, and then connect the air cleaner hose No. 1 to the throttle body and unfasten the No. 1 air cleaner hose clamp.

NOTICE:

Make sure that the hose clamp is at the correct angle.

Connect the No. 2 ventilation hose to the air cleaner hose.

Connect the purge line hose to the clamp (^*1).

Connect the 2 purge VSV vacuum hoses (^*2).

Connect the purge VSV connector (^*3).

Connect the mass air flow meter connector (^*4).

Install the engine cover with the 2 nuts.

Torque:

9.0 N*m{92 kgf*cm, 80 in.*lbf}