Ecm Installation

Install the bracket to the ECM with the 4 screws.

Torque:

3.0 N*m{30 kgf*cm, 27 in.*lbf}

Install the ECM with the 3 bolts.

Torque:

9.0 N*m{82 kgf*cm, 71 in.*lbf}

Connect the 2 ECM connectors.

NOTICE:

When connecting the connector, make sure that dirt, water and other foreign matter does not become stuck between the connector and other part.

1. Connect the 2 ECM connectors and lower the 2 levers.
   

   NOTICE:

   Make sure that the 2 levers are securely lowered.

Install the air cleaner bracket with the 2 bolts.

Install the air cleaner case with the 3 bolts.

Torque:

5.0 N*m{51 kgf*cm, 44 in.*lbf}

Connect the hose clamp.

Install the air cleaner filter element onto the air cleaner case.

Insert the hinges. Install the air cleaner cap sub-assembly with the 2 bolts.

Align the matchmarks of the No. 1 air cleaner hose and throttle body, and then connect the air cleaner hose No. 1 to the throttle body and unfasten the No. 1 air cleaner hose clamp.

NOTICE:

Make sure that the hose clamp is at the correct angle.

Connect the No. 2 ventilation hose to the air cleaner hose.

Connect the purge line hose to the clamp (^*1).

Connect the 2 purge VSV vacuum hoses (^*2).

Connect the purge VSV connector (^*3).

Connect the mass air flow meter connector (^*4).

Install the engine cover with the 2 nuts.

Torque:

9.0 N*m{92 kgf*cm, 80 in.*lbf}

When replacing the ECM, perform the RESET MEMORY procedure (A/T initialization) (CAMRY_ACV40 RM000000W7F0C2X.html).