Throttle Body Removal

Engine. Camry. Acv40 Gsv40
2Az-Fe Engine Control System. Camry. Acv40 Gsv40

  1. DRAIN ENGINE COOLANT

  2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

  4. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

  5. REMOVE THROTTLE BODY

Throttle Body -- Removal



1. DRAIN ENGINE COOLANT
NOTICE:
Do not remove the radiator cap sub-assembly while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.

  1. Remove the radiator cap sub-assembly from the radiator assembly.



  1. Loosen the radiator drain cock plug and cylinder block drain cock plug, then drain the coolant.


    Camry. Acv40 Gsv40.2Az-Fe Engine Control System.Sfi System.Throttle Body Removal

    HINT:
    Collect the coolant in a container and dispose of it according to the regulations in your area.


2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


    Camry. Acv40 Gsv40

  1. Remove the 2 nuts and cover.



3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY


    Camry. Acv40 Gsv40.2Az-Fe Engine Control System.Sfi System.Throttle Body Removal

  1. Disconnect the mass air flow meter connector (*1).

  1. Disconnect the purge VSV connector (*2).

  1. Disconnect the 2 purge VSV vacuum hoses (*3).

  1. Disconnect the purge line hose from the clamp (*4).



    Camry. Acv40 Gsv40.2Az-Fe Engine Control System.Sfi System.Throttle Body Removal

  1. Disconnect the No. 2 ventilation hose from the air cleaner hose.



    Camry. Acv40 Gsv40

  1. Lock the No. 1 air cleaner hose clamp, and then disconnect the No. 1 air cleaner hose from the throttle body.



    Camry. Acv40 Gsv40

  1. Remove the 2 bolts and air cleaner cap.

  1. Remove the air cleaner filter element from the air cleaner case.



4. REMOVE AIR CLEANER CASE SUB-ASSEMBLY


    Camry. Acv40 Gsv40

  1. Disconnect the hose clamp.

  1. Remove the 3 bolts and air cleaner case.



5. REMOVE THROTTLE BODY


    Camry. Acv40 Gsv40.2Az-Fe Engine Control System.Sfi System.Throttle Body Removal

  1. Disconnect the throttle position sensor connector and wire harness clamp.



    Camry. Acv40 Gsv40.2Az-Fe Engine Control System.Sfi System.Throttle Body Removal

  1. Remove the 4 bolts, and then remove the fuel pipe support and throttle body.



    Camry. Acv40 Gsv40.2Az-Fe Engine Control System.Sfi System.Throttle Body Removal

  1. Disconnect the purge line hose from the throttle body.

  1. Disconnect the water by-pass hose from the throttle body.

  1. Disconnect the No. 2 water by-pass hose from the throttle body.

  1. Disconnect the No. 1 throttle body hose from the throttle body.



    Camry. Acv40 Gsv40

  1. Remove the gasket from the intake manifold.