Body Electrical. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Other System. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Rear Power Outlet Socket (For Long Body) -- Removal |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE REAR DOOR SCUFF PLATE LH |
 |
Using a screwdriver, detach the 9 claws.
- HINT:
- Tape the screwdriver tip before use.
Using a clip remover, detach the 2 clips and remove the garnish.
| 3. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH |
| 4. REMOVE PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY |
| 5. REMOVE TONNEAU COVER ASSEMBLY |
| 6. REMOVE REAR FLOOR NO. 1 BOARD |
| 7. REMOVE DECK BOARD ASSEMBLY |
| 8. REMOVE REAR FLOOR NO. 3 BOARD |
| 9. REMOVE REAR FLOOR NO. 2 BOARD |
| 10. REMOVE REAR FLOOR NO. 1 MAT SUPPORT SIDE PLATE |
 |
Remove the 4 screws.
Using a clip remover, detach the 7 clips and remove the plate.
| 11. REMOVE BACK DOOR WEATHERSTRIP |
| 12. REMOVE REAR FLOOR FINISH PLATE |
 |
Using a clip remover, detach the 6 clips.
Detach the 2 claws and remove the finish plate.
| 13. REMOVE RECLINING REMOTE CONTROL LEVER BEZEL LH |
| 14. REMOVE TETHER ANCHOR BRACKET SUB-ASSEMBLY |
| 15. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH |
Disconnect the rear No.1 seat outer belt's floor anchor.
Remove the anchor cover.
Remove the bolt and disconnect the floor anchor.
 |
Remove the 2 screws and 2 bolts.
 |
Using a screwdriver, detach the 5 claws.
- HINT:
- Tape the screwdriver tip before use.
Using a clip remover, detach the 4 clips and remove the trim board.
Disconnect the power outlet socket connector.
Remove the belt hanger.
| 16. REMOVE REAR POWER OUTLET SOCKET ASSEMBLY |
 |
Detach the 2 claws fittings and remove the socket.