Low Pitched Horn (W/ Hood Moulding) Removal

Body Electrical. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Horn. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. REMOVE RADIATOR SUPPORT OPENING COVER

  2. REMOVE RADIATOR GRILLE PROTECTOR

  3. REMOVE FRONT FENDER FRONT SPLASH SHIELD LH (w/ Diffuser)

  4. REMOVE FRONT FENDER FRONT SPLASH SHIELD RH (w/ Diffuser)

  5. REMOVE FRONT BUMPER COVER

  6. REMOVE LOW PITCHED HORN ASSEMBLY

Low Pitched Horn (W/ Hood Moulding) -- Removal



1. REMOVE RADIATOR SUPPORT OPENING COVER


Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Remove the 9 clips and radiator support opening cover.



2. REMOVE RADIATOR GRILLE PROTECTOR


Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Remove the 3 radiator grille protectors.



3. REMOVE FRONT FENDER FRONT SPLASH SHIELD LH (w/ Diffuser)


Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Remove the bolt, nut, screw and front fender front splash shield.



4. REMOVE FRONT FENDER FRONT SPLASH SHIELD RH (w/ Diffuser)
HINT:
Use the same procedure described for the LH side.


5. REMOVE FRONT BUMPER COVER


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Horn.Horn System.Low Pitched Horn (W/ Hood Moulding) Removal

  1. Using a screwdriver, turn the pin hold clip 90° and remove the pin hold clip.

    HINT:
    1. Tape the screwdriver tip before use.
    2. Use the same procedure for the RH and LH sides.


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. w/ Diffuser:
    Remove the 8 screws and 4 clips.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. w/o Diffuser:
    Remove the 10 screws and 4 clips.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Horn.Horn System.Low Pitched Horn (W/ Hood Moulding) Removal

  1. Put protective tape around the bumper cover.

  1. Detach the 4 claws.

  1. w/ Headlight Cleaner System:
    Disconnect the headlight cleaner hose.

  1. Disconnect the 2 fog light connectors and remove the front bumper cover.



6. REMOVE LOW PITCHED HORN ASSEMBLY


Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Disconnect the horn connector.

  1. Remove the bolt and horn.