Navigation System (For Dvd) Dtc Check / Clear

Body Electrical. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Navigation. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. START DIAGNOSTIC MODE

  1. FINISH DIAGNOSTIC MODE

  1. DIAGNOSIS MENU

  1. CHECK DTC

  1. DTC CLEAR/RECHECK

Navigation System (For Dvd) -- Dtc Check / Clear


HINT:
  1. Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle.
  2. After the ignition switch is turned to ON, check that the map is displayed before starting the diagnostic mode. Otherwise, some items cannot be checked.

START DIAGNOSTIC MODE

  1. There are 2 methods to start diagnostic mode. Start the mode by using one of them.



    2. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Navigation.Navigation System (For Dvd).Navigation System (For Dvd) Dtc Check / Clear

  2. Method 1

    1. Start the engine.

    2. While pressing and holding the "INFO" switch, operate the light control switch: Off → Turn On → Turn Off → Turn On → Turn Off → Turn On → Turn Off.

    3. The diagnostic mode starts and the "System Check Mode" screen will be displayed. Service inspection starts automatically and the result will be displayed.



  3. Method 2

    1. Start the engine.



      2. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Navigation.Navigation System (For Dvd).Navigation System (For Dvd) Dtc Check / Clear

    2. Press the "DISPLAY" switch.



      3. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Navigation.Navigation System (For Dvd).Navigation System (For Dvd) Dtc Check / Clear

    3. From the display quality adjustment screen, touch the corners of the screen in the following order: upper left → lower left → upper left → lower left → upper left → lower left.

    4. The diagnostic mode starts and the "System Check Mode" screen will be displayed. Service inspection starts automatically and the result will be displayed.


FINISH DIAGNOSTIC MODE

  1. There are 2 methods to end diagnostic mode. Use one of them.

    1. Turn the ignition switch off.

    2. Press and hold the "DISP" switch for 3 seconds.


DIAGNOSIS MENU


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Navigation.Navigation System (For Dvd).Navigation System (For Dvd) Dtc Check / Clear

  1. Press the "MENU" switch on the "System Check Mode" screen.



    2. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Navigation.Navigation System (For Dvd).Navigation System (For Dvd) Dtc Check / Clear

  2. The "Diagnosis MENU" screen will be displayed.


CHECK DTC


  1. Read the system check result.



      Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Navigation.Navigation System (For Dvd).Navigation System (For Dvd) Dtc Check / Clear

    1. If the check result is "EXCH", "CHEK" or "Old", touch the displayed check result.



      2. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Navigation.Navigation System (For Dvd).Navigation System (For Dvd) Dtc Check / Clear

    2. View the results on the "Unit Check Mode" screen and record them.



      3. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Navigation.Navigation System (For Dvd).Navigation System (For Dvd) Dtc Check / Clear

    3. When proceeding to view the results of another device, press the "Service" switch to return to the "System Check Mode" screen.

      HINT:
      To check other items, repeat from the first step.


  2. Read the communication diagnostic check result.



      Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Navigation.Navigation System (For Dvd).Navigation System (For Dvd) Dtc Check / Clear

    1. Return to the "System Check Mode" screen, and press the "LAN Mon" switch.



      2. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

    2. The "LAN Monitor" screen is displayed.



      3. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Navigation.Navigation System (For Dvd).Navigation System (For Dvd) Dtc Check / Clear

    3. If the check result is "CHEK" or "Old", touch the displayed check result.

      HINT:
      If all check results are "No Err", the system judges that no DTC is stored.


      4. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Navigation.Navigation System (For Dvd).Navigation System (For Dvd) Dtc Check / Clear

    4. View the results on the individual communication diagnostic screen and record them.

      HINT:
      Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Navigation.Navigation System (For Dvd).Navigation System (For Dvd) Dtc Check / Clear
      The sub-code (relevant device) will be indicated with its physical address.

DTC CLEAR/RECHECK


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Navigation.Navigation System (For Dvd).Navigation System (For Dvd) Dtc Check / Clear

  1. Clear DTC

    1. Press the "Code CLR" switch for 3 seconds.

    2. The check results are cleared.



    2. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Navigation.Navigation System (For Dvd).Navigation System (For Dvd) Dtc Check / Clear

  2. Recheck

    1. Press the "Recheck" switch.



      2. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Navigation.Navigation System (For Dvd).Navigation System (For Dvd) Dtc Check / Clear

    2. Confirm that all diagnostic codes are "OK" when the check results are displayed. If a code other than "OK" is displayed, troubleshoot again.



      3. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Navigation.Navigation System (For Dvd).Navigation System (For Dvd) Dtc Check / Clear

    3. Press the "LAN Mon" switch to change to the "LAN Monitor" screen.



      4. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Navigation.Navigation System (For Dvd).Navigation System (For Dvd) Dtc Check / Clear

    4. Confirm that all diagnostic codes are "No Err". If a code other than "No Err" is displayed, troubleshoot again.