Body Electrical. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Meter. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Meter / Gauge System -- Data List / Active Test |
READ DATA LIST |
- HINT:
- Using the intelligent tester's Data List allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the tester ON.
Select the following menu items: Body / Combination Meter / Data List.
Check the results by referring to the table below.
Combination meter Tester Display Measurement Item/Range Normal Condition Diagnostic Note +B Voltage Value Vehicle battery voltage / Min.: 0 V, Max.: 25.5 V 11 to 14 V - Vehicle Speed Meter Vehicle speed / Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) Almost same as actual vehicle speed (When driving) - Engine Rpm Engine speed / Min.: 0 rpm, Max.: 12,750 rpm Almost same as actual engine speed (When engine is running) - Fuel Input (A/D) Fuel input signal / Min.: 0, Max.: 255 Fuel gauge indicates (F): 33
Fuel gauge indicates (3/4): 98
Fuel gauge indicates (1/2): 144
Fuel gauge indicates (1/4): 179
Fuel gauge indicates (E): 206- Coolant Temperature Coolant temperature / Min.: 0°C (32°F), Max.: 127.5°C (261.5°F) After warming up: 80 to 95°C (176 to 203°F) If the value is "0°C (32°F)" or "127.5°C (261.5°F)", sensor circuits are open or shorted. ODO / TRIP Change SW ODO / TRIP switch / ON or OFF ON: Switch is pushed
OFF: Switch is released- Tail Cancel SW TAIL CANCEL switch / ON or OFF ON: Tail cancel available
OFF: Tail cancel unavailable- Tail Relay SW Illumination switch / ON or OFF ON: Tail switch ON
OFF: Tail switch OFF- P-Seatbelt Buckle SW Front passenger side seat belt / ON or OFF ON: Seat belt fastened
OFF: Seat belt not fastened- Rheostat value (A/D) Light control rheostat volume / Min.: 0, Max.: 255 Light control rheostat Min. position: 0
Light control rheostat Max. position: 255- Quantity of Outside Light Outside light control output / Min.: 0%, Max.: 100% Current vehicle condition is displayed - Ambient Temperature (A/D) Outside temperature input / Min.: 0, Max.: 255 Current outside temperature conditions
40°C (104°F): 78
25°C (77°F): 98
0°C (32°F): 135- Seat-belt Warning Buzzer Seat belt warning buzzer / D/P ON, D ON, P ON or D/P OFF D/P ON: Driver and passenger buzzer ON
D ON: Driver buzzer ON
P ON: Passenger buzzer ON
D/P OFF: Driver and passenger buzzer OFFCurrent vehicle condition is displayed Number of Trouble Code Number of diagnosis codes / Min.: 0, Max.: 255 - - Communication ECM/Meter DTC DTC is displayed - - ODO (History 1) Value when DTC is output / Min.: 0 km, Max.: 999999 km - - ODO (History 2) Value when DTC is output / Min.: 0 km, Max.: 999999 km - - ODO (History 3) Value when DTC is output / Min.: 0 km, Max.: 999999 km - - Communication ABS/Meter DTC DTC is displayed - - ODO (History 1) Value when DTC is output / Min.: 0 km, Max.: 999999 km - - ODO (History 2) Value when DTC is output / Min.: 0 km, Max.: 999999 km - - ODO (History 3) Value when DTC is output / Min.: 0 km, Max.: 999999 km - -
PERFORM ACTIVE TEST |
- HINT:
- Performing the intelligent tester's Active Test allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The Data List can be displayed during the Active Test.
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the tester ON.
Select the following menu items: Body / Combination Meter / Active Test.
Perform the Active Test by referring to the table below.
Combination meter Tester Display Test Part Control Range Speed Meter Operation 0 / 40 / 80 / 120 / 160 / 200 / 240 km/h Value selected during Active Test is displayed TachoMeter Operation 0 / 1,000 / 2,000 / 3,000 / 4,000 / 5,000 / 6,000 / 7,000 rpm Value selected during Active Test is displayed Fuel Meter Operation EMPTY / 1/2 / FULL Value selected during Active Test is displayed Water Temperature Meter Operation LOW / NORMAL / HIGH Value selected during Active Test is displayed A/T Indicator Operation 1 P / R / N / D / 4 / 3 / 2 / L Position selected during Active Test illuminates Indicat. Lamp Beam BEAM indicator light
ON / OFF- Indicat. Lamp Tail TAIL indicator light
ON / OFF- Indicat. Lamp Fr FOG Fr FOG indicator light
ON / OFF- Indicat. Lamp Rr FOG Rr FOG indicator light
ON / OFF- Indcat. Lamp Airbag AIRBAG warning light
ON / OFF- Indicat. Lamp D-seat Belt D-SEAT BELT indicator light
ON / OFF- Indicat. Lamp P-seat Belt P-SEAT BELT indicator light
ON / OFF- Indicat. Lamp Doors All Open DOOR warning light
ON / OFFw/o Multi-information display Indicat. Lamp Fuel FUEL warning light
ON / OFF- Indicat. Lamp Charge CHARGE warning light
ON / OFF- Indicat. Lamp ABS ABS warning light
ON / OFF- Indicat. Lamp Slip SLIP indicator light
ON / OFF- Indicat. Lamp VSC VSC warning light
ON / OFFw/o Multi-information display Indicat. Lamp 4WD 4WD indicator light
ON / OFF- Indicat. Lamp Brake BRAKE warning light
ON / OFF- A/T Oil Temperature Operation A/T OIL indicator light
ON / OFFw/o Multi-information display Indicat. EPS P/S indicator light
ON / OFF- Indicat. Lamp Cruise CRUISE indicator light
ON / OFF- Master Warning Master warning light
ON / OFF- Indicat. 4WD Lock DIF. LOCK indicator light
ON / OFF- Indicat. Auto LSD AUTO LSD indicator light
ON / OFFw/o Multi-information display Indicat. DAC Downhill assist control indicator light
ON / OFF-