Meter / Gauge System How To Proceed With Troubleshooting

Body Electrical. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Meter. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. VEHICLE BROUGHT TO WORKSHOP

  2. INSPECT BATTERY VOLTAGE

  3. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM (CAN)*

  4. PROBLEM SYMPTOMS TABLE

  5. OVERALL ANALYSIS AND TROUBLESHOOTING*

  6. REPAIR OR REPLACE

  7. CONFIRMATION TEST

Meter / Gauge System -- How To Proceed With Troubleshooting


HINT:
  1. Use these procedures to troubleshoot the meter / gauge system.
  2. *: Use the intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.INSPECT BATTERY VOLTAGE
      Standard voltage:
      11 to 14 V
      If the voltage is below 11 V, recharge or replace the battery before proceeding.

    NEXT


    3.CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM (CAN)*

    1. Use the intelligent tester to check if the CAN communication system is functioning normally.

      2. Result
      Result
      		Proceed to
      CAN DTC is not output
      		A
      CAN DTC is output
      		B


    		B.
    GO TO CAN COMMUNICATION SYSTEM
    A


    4.PROBLEM SYMPTOMS TABLE

      Result
      Result
      		Proceed to
      Fault is not listed in problem symptoms table
      		A
      Fault is listed in problem symptoms table
      		B


    		B.
    Go to step 6
    A


    5.OVERALL ANALYSIS AND TROUBLESHOOTING*

    1. Data List / Active Test (RAV4_ACA30 RM0000020M5001X.html)

    2. Terminals of ECU (RAV4_ACA30 RM000001ZAA002X.html)

    3. On-vehicle Inspection (RAV4_ACA30 RM0000020M9001X.html)


    NEXT


    6.REPAIR OR REPLACE

      NEXT


      7.CONFIRMATION TEST

        NEXT

        END