INSPECT FRONT DOOR WITH MOTOR LOCK ASSEMBLY (for Driver Side)
INSPECT FRONT DOOR WITH MOTOR LOCK ASSEMBLY (for Passenger Side)
Front Door Lock -- Inspection |
| 1. INSPECT FRONT DOOR WITH MOTOR LOCK ASSEMBLY (for Driver Side) |
for LHD:
Apply the battery voltage to the motor terminals and check the operation of the door lock motor.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 4 (L)
Battery negative (-) → 1 (UL)Lock Battery positive (+) → 1 (UL)
Battery negative (-) → 4 (L)Unlock
- If the result is not as specified, replace the door lock assembly.
Measure the resistance of the door lock position switch.
- Standard resistance:
Tester Connection Switch Condition Specified Condition 8 (LSSR) - 7 (E) Lock 10 kΩ or higher 8 (LSSR) - 7 (E) Unlock Below 1 Ω
- If the result is not as specified, replace the door lock assembly.
Measure the resistance of the door key lock and unlock switch operation.
- Standard resistance:
Tester Connection Switch Condition Specified Condition 9 (L) - 7 (E) Lock Below 1 Ω 9 (L) - 7 (E) OFF 10 kΩ or higher 10 (UL) - 7 (E) Unlock Below 1 Ω 10 (UL) - 7 (E) OFF 10 kΩ or higher
- If the result is not as specified, replace the door lock assembly.
for RHD (w/o Double Locking System):
Apply the battery voltage to the motor terminals and check the operation of the door lock motor.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 4 (L)
Battery negative (-) → 1 (UL)Lock Battery positive (+) → 1 (UL)
Battery negative (-) → 4 (L)Unlock
- If the result is not as specified, replace the door lock assembly.
Measure the resistance of the position switch.
- Standard resistance:
Tester Connection Switch Condition Specified Condition 7 (LSSR) - 8 (E) Lock 10 kΩ or higher 7 (LSSR) - 8 (E) Unlock Below 1 Ω
- If the result is not as specified, replace the door lock assembly.
Measure the resistance of the door lock and unlock switch.
- Standard resistance:
Measurement Condition Switch Condition Specified Condition 5 (UL) -8 (E) Lock Below 1 Ω 5 (UL) -8 (E) OFF 10 kΩ or higher 6 (L) - 8 (E) Unlock Below 1 Ω 6 (L) - 8 (E) OFF 10 kΩ or higher
- If the result is not as specified, replace the door lock assembly.
 |
for RHD (w/ Double Locking System):
Apply the battery voltage to the motor terminals and check the operation of the door lock motor.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 2 (L)
Battery negative (-) → 1 (UL)Lock Battery positive (+) → 1 (UL)
Battery negative (-) → 2 (L)Unlock
- If the result is not as specified, replace the door lock assembly.
Measure the resistance of the position switch.
- Standard resistance:
Tester Connection Switch Condition Specified Condition 7 (LSSR) - 8 (E) Lock 10 kΩ or higher 7 (LSSR) - 8 (E) Unlock Below 1 Ω
- If the result is not as specified, replace the door lock assembly.
Measure the resistance of the door lock and unlock switch.
- Standard resistance:
Measurement Condition Switch Condition Specified Condition 5 (UL) -8 (E) Lock Below 1 Ω 5 (UL) -8 (E) OFF 10 kΩ or higher 6 (L) - 8 (E) Unlock Below 1 Ω 6 (L) - 8 (E) OFF 10 kΩ or higher
- If the result is not as specified, replace the door lock assembly.
 |
| 2. INSPECT FRONT DOOR WITH MOTOR LOCK ASSEMBLY (for Passenger Side) |
for LHD:
Apply the battery voltage to the door lock motor and check the operation of the door lock motor.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 4 (L)
Battery negative (-) → 1 (UL)Lock Battery positive (+) → 1 (UL)
Battery negative (-) → 4 (L)Unlock
- If the result is not as specified, replace the door lock assembly.
Measure the resistance of the door lock position switch.
- Standard resistance:
Tester Connection Switch Condition Specified Condition 7 (LSSR) - 8 (E) Lock 10 kΩ or higher 7 (LSSR) - 8 (E) Unlock Below 1 Ω
- If the result is not as specified, replace the door lock assembly.
for RHD (w/o Double Locking System):
Apply the battery voltage to the door lock motor and check the operation of the door lock motor.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 4 (L)
Battery negative (-) → 1 (UL)Lock Battery positive (+) → 1 (UL)
Battery negative (-) → 4 (L)Unlock
- If the result is not as specified, replace the door lock assembly.
Measure the resistance of the door lock position switch.
- Standard resistance:
Tester Connection Switch Condition Specified Condition 8 (LSSR) - 7 (E) Lock 10 kΩ or higher 8 (LSSR) - 7 (E) Unlock Below 1 Ω
- If the result is not as specified, replace the door lock assembly.
|
for RHD (w/ Double Locking System):
Apply the battery voltage to the door lock motor and check the operation of the door lock motor.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 4 (L)
Battery negative (-) → 3 (UL)Lock Battery positive (+) → 3 (UL)
Battery negative (-) → 4 (L)Unlock
- If the result is not as specified, replace the door lock assembly.
Measure the resistance of the door lock position switch.
- Standard resistance:
Tester Connection Switch Condition Specified Condition 8 (LSSR) - 7 (E) Lock 10 kΩ or higher 8 (LSSR) - 7 (E) Unlock Below 1 Ω
- If the result is not as specified, replace the door lock assembly.
 |