Front Wiper Motor And Link Removal
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE FRONT WIPER ARM HEAD CAP
REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH
REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH
REMOVE FRONT FENDER TO COWL SIDE SEAL LH
REMOVE FRONT FENDER TO COWL SIDE SEAL RH
REMOVE COWL TOP VENTILATOR LOUVER
REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY
Front Wiper Motor And Link -- Removal |
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- w/ Navigation System (for HDD):
After the ignition switch is turned off, the HDD navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the ignition switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.
2. REMOVE FRONT WIPER ARM HEAD CAP |
Remove the 2 caps.
3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH |
Remove the nut and arm and blade.
4. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH |
Remove the nut and arm and blade.
5. REMOVE FRONT FENDER TO COWL SIDE SEAL LH |
Detach the claw and remove the front fender to cowl side seal.
6. REMOVE FRONT FENDER TO COWL SIDE SEAL RH |
Detach the claw and remove the front fender to cowl side seal.
7. REMOVE COWL TOP VENTILATOR LOUVER |
Remove the 2 clips.
Detach the 12 claws and remove the louver.
8. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY |
Remove the 2 bolts.
Move the wiper cushion in the direction shown by the arrow in the illustration to detach the wiper cushion from the body, and remove the wiper motor and link.
Disconnect the connector and detach the clamp.
9. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY |
Using a screwdriver, disconnect the rod of the wiper link from the wiper motor as shown in the illustration.
- HINT:
- Tape the screwdriver tip before use.
Put matchmarks on the crank arm and motor, as shown in the illustration.
Remove the 3 bolts and wiper motor.