INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY (w/ Knee Airbag) (for RHD)
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (w/o Knee Airbag) (for RHD)
INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)
INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)
Wiper Ecu (W/ Rain Sensor) -- Installation |
| 1. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY (for RHD) |
 |
Install the wiper relay with the bolt.
Connect the connector.
| 2. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY (for LHD) |
 |
Install the wiper relay with the bolt.
Connect the connector.
| 3. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY (w/ Knee Airbag) (for RHD) |
 |
Connect the connector.
- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
Install the driver side knee airbag with the 4 bolts.
- Torque:
- 10 N*m{101 kgf*cm, 7 ft.*lbf}
| 4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (w/o Knee Airbag) (for RHD) |
 |
Attach the 8 claws to install the lower instrument panel finish panel.
Install the 2 screws.
| 5. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD) |
Attach the 3 claws to install the cover.
 |
Install the 2 screws.
| 6. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD) |
Attach the 2 hinges to install the door.
 |
Attach the claw to the glove compartment door stopper.
 |
While pushing in the sides of the glove compartment door in the direction indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.
| 7. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD) |
 |
Attach the 3 claws to install the instrument panel under cover.
| 8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |