Body Electrical. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Wiper And Washer. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Front Wiper Rubber -- Installation |
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
1. INSTALL WIPER RUBBER |
Install the 2 packing plates to the rubber.
- NOTICE:
- Install the packing plates facing the proper direction.
![]() |
Install the wiper rubber to the claw of the wiper blade in the direction indicated by the arrow in the illustration.
- HINT:
- Install the wiper rubber so that the head part (large side) of the wiper rubber faces the arm axle side.
![]() |
Attach the head part (large side) of the wiper rubber to the rear end side claw of the wiper blade.
- NOTICE:
- Push the wiper blade into the grooves of the wiper rubber to attach them completely.
![]() |
2. INSTALL WIPER RUBBER (for Plastic Type) |
![]() |
Install the 2 packing plates to the rubber.
- NOTICE:
- Install the packing plates facing the proper direction.
Install the wiper rubber to the claw of the wiper blade in the direction indicated by the arrow in the illustration.
- HINT:
- Install the wiper rubber so that the head part (large side) of the wiper rubber faces the arm axle side.
![]() |
Attach the head part (large side) of the wiper rubber to the rear end side claw of the wiper blade.
- NOTICE:
- Push the wiper blade into the grooves of the wiper rubber to attach them completely.
3. INSTALL FRONT WIPER BLADE |
Attach the claw to install the wiper blade.
![]() |
4. INSTALL FRONT WIPER BLADE (for Plastic Type) |

Install the wiper blade.
Install the holder as shown in the illustration.