Lighting System Operation Check

Body Electrical. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Lighting. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. ILLUMINATED ENTRY SYSTEM OPERATION CHECK

  1. FOOT LIGHT OPERATION CHECK

  1. BATTERY SAVER OPERATION CHECK

  1. LIGHT AUTO TURN OFF OPERATION CHECK

  1. AUTOMATIC LIGHT CONTROL OPERATION CHECK

  1. DAYTIME RUNNING LIGHT OPERATION CHECK

Lighting System -- Operation Check



ILLUMINATED ENTRY SYSTEM OPERATION CHECK

  1. Illuminated entry system controls the following lights:

    1. Ignition key cylinder light*1 or transponder key amplifier*2
    2. Foot light
    3. Map light
    4. Room light
    HINT:
    *1: w/o Entry and start system (w/o Engine immobiliser system)
    *2: w/o Entry and start system (w/ Engine immobiliser system)

  2. Check that the lights come on when unlocking any of the doors that are closed and locked with the ignition switch off. Then check that the lights fade out under the following conditions:

    1. Leave the doors unlocked for 15 seconds.

    2. Turn the ignition switch on (ACC or ON).

    3. Lock all the doors.

  3. Check that the lights stay on for at least 15 seconds after opening any of the doors before fading out. Then check that the lights fade out 15 seconds after closing all the doors.

  4. Check that the lights stay lit after turning the ignition switch off with all the doors closed and the ignition switch in the on (ACC or ON) position. Then check that the lights fade out under the following conditions:

    1. Leave the doors unlocked for 15 seconds.

    2. Turn the ignition switch on (ACC or ON).

    3. Lock all the doors.

  5. Check that the lights stay on for at least 15 seconds after opening any of the doors. Then check that the lights fade out 15 seconds after closing all the doors.

  6. Check that the lights come on when opening any of the doors and fade out when closing and locking all the doors or turning the ignition switch to the on (ACC or ON) position.


FOOT LIGHT OPERATION CHECK

  1. Check that the lights come on when unlocking any of the doors that are closed and locked with the ignition switch off. Then check that the lights fade out under the following conditions:

    1. Leave the doors unlocked for 15 seconds.

    2. Lock all the closed doors and turn the ignition switch off.

  2. Check that the lights stay on for at least 15 seconds under the following conditions before going off.

    1. For A/T:
      Turn the ignition switch to the on (IG) position, and shift the shift lever to the P position.

    2. For M/T:
      Turn the ignition switch to the on (IG) position, and pull the parking brake lever.

    3. Open any of the doors.

  3. Check that the lights dim before going off under the following conditions.

    1. For M/T:
      Turn the ignition switch on (IG) and release the parking brake lever.

    2. For A/T:
      Turn the ignition switch on (IG) and shift the shift lever into any position other than P.

  4. Check the conditions below before the lights go off.

    1. The lights dim when shifting into a position other than P and closing all the doors with the ignition switch on (IG).

    2. The lights come on for 15 seconds and fade out when shifting into the P position and closing all the doors with the ignition switch off.

  5. Check that the lights come on after opening any of the doors.

  6. Check that the lights fade out 15 seconds after closing all the doors, or locking all the doors.

  7. Check that the lights come on gradually with the ignition switch on (IG) and the shift lever in the P position.

  8. Check that the lights dim when shifting from P into another position with all the doors closed.

  9. Check that the lights stay dimmed with the ignition switch on (IG) and the shift lever in a position other than P.


BATTERY SAVER OPERATION CHECK

  1. Turn the ignition switch off and close all the doors.

  2. Open any door to turn the room light on, and leave it open. Check that the light goes off after about 20 minutes.

  3. After the room light goes off, close the driver's door.

  4. Open any door to turn the room light on, and then open another door. Check that the room light goes off within 20 minutes after opening the doors.

  5. Close all the doors. Open any door to turn the room light on. Check that the room light goes off within 20 minutes.


LIGHT AUTO TURN OFF OPERATION CHECK

  1. Turn the ignition switch on (IG), and turn the light control switch to the TAIL or HEAD position.

  2. Turn the ignition switch off, and check that the headlight and front fog lights go off immediately.

  3. Turn the ignition switch on (IG), and turn the light control switch to the AUTO position.

  4. Check that the headlights, taillights, front fog lights, and rear fog lights go off when turning the ignition switch off and opening the driver's door while the automatic light control system is working with the light on.


AUTOMATIC LIGHT CONTROL OPERATION CHECK

  1. Turn the ignition switch on (IG).

  2. Turn the light control switch to the AUTO position.

  3. Cover the automatic light control sensor and check that the taillights and headlights come on in order.

  4. Uncover the automatic light control sensor and check that the headlights and taillights go off in order.


DAYTIME RUNNING LIGHT OPERATION CHECK

  1. Check that the headlights come on when the light control switch is off with the engine running. Then check that the lights go off under the following condition:

    1. Turn the light control switch to the TAIL position.

    2. Turn the ignition switch off.