Lexus IS250 IS220d GSE20 ALE20 4GR-FSE STARTING
ENTRY AND START SYSTEM - DATA LIST / ACTIVE TEST
| READ DATA LIST |
- HINT:
- Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful as intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the DATA LIST information early in troubleshooting is one way to save diagnostic time.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Read the DATA LIST.
| Item | Measurement Item / Display (Range) | Normal Condition | Diagnostic Note |
| Shift P Sig | Shift P switch / ON or OFF | ON: Shift P position OFF: Shift non-P position | - |
| Str Unlock SW | Steering lock condition / ON or OFF | ON: Steering is unlocked OFF: Steering is locked | - |
| Stop Lamp SW1 | Stop light switch 1 / ON or OFF | ON: Brake pedal depressed OFF: Brake pedal released | - |
| St SW1 | Start switch 1 / ON or OFF | ON: Engine switch is pushed OFF: Engine switch is not pushed | - |
| St SW2 | Start switch 2 / ON or OFF | ON: Engine switch is pushed OFF: Engine switch is not pushed | - |
| N SW / C SW | Neutral start switch (A/T) clutch start switch (M/T) / ON or OFF | ON: Shift position is P or N (A/T) clutch pedal depressed (M/T) OFF: Shift position is neither P nor N (A/T) clutch pedal released (M/T) | - |
| Ratch Circuit | Ratch circuit / ON or OFF | ON: Engine switch on (IG) or engine running OFF: Engine switch off, on (ACC) | - |
| IG1 Relay Mon1 | IG1 outer relay monitor / ON or OFF | ON: Engine switch on (IG) OFF: Engine switch off | - |
| IG1 Relay Mon2 | IG1 inner relay monitor / ON or OFF | ON: Engine switch on (IG) OFF: Engine switch off | - |
| IG2 Relay Mon1 | IG2 outer relay monitor / ON or OFF | ON: Engine switch on (IG) OFF: Engine switch off | - |
| IG2 Relay Mon2 | IG2 inner relay monitor / ON or OFF | ON: Engine switch on (IG) OFF: Engine switch off | - |
| St Relay Mon | STARTER relay monitor / ON or OFF | ON: Engine is cranking OFF: Engine is not cranking | Engine is cranking with engine switch on (IG) and shift lever in P or N (A/T) or clutch pedal depressed (M/T) |
| St Request Sig | Starter request signal monitor / ON or OFF | ON: ST relay is ON OFF: ST relay is OFF | Engine switch pressed and held with shift lever in P or N (A/T) or with clutch pedal depressed (M/T) |
| ACC Relay Mon | ACC relay monitor / ON or OFF | ON: Engine switch on (ACC) OFF: Engine switch off | - |
| ACC Cut Sig | ACC relay cut signal / ON or OFF | ON: Engine is cranking OFF: Engine is not cranking | - |
| E/G Cond | Engine condition / STOP or RUN | STOP: Engine is stopped RUN: Engine is running | - |
| Vehicle Spd Sig | Vehicle speed signal / STOP or RUN | STOP: Vehicle is stopped RUN: Vehicle is running | - |
| Shift P Signal Pulse | Shift P position signal (A/T) / NORMAL1, NORMAL2, NORMAL3, ERROR1, ERROR2, ERROR3, UNKNOWN | NORMAL1: Normal condition and shift position is condition unknown NORMAL2: Normal condition and shift position is P NORMAL3: Normal condition and shift position is not P ERROR1: Malfunction condition and shift position is condition unknown ERROR2: Malfunction condition and shift position is P ERROR3: Malfunction condition and shift position is not P UNKNOWN: Condition unknown | - |
| Pwr Cond | Power supply condition / ALL, ACC ON, IG1 IG2, ST ON | ALL: All relays are OFF ACC ON: ACC relay is ON IG1: IG1 relay is ON IG2: IG2 relay is ON ST ON: ST request signal is ON | - |
| #Code | Number of diagnostic codes / Min.: 0, Max.: 255 | - | - |
| PERFORM ACTIVE TEST |
- HINT:
- Performing the intelligent tester's ACTIVE TEST allows the relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Perform the ACTIVE TEST according to the display on the tester.
| Item | Test Details | Diagnostic Note |
| Lighting Ind | Indicator for lighting ON / OFF | - |
| Ind Condition | Indicator Green / Amber / No Sig | - |
| S Lock Pwr | Power supply for steering lock ECU ON / OFF | - |