Suspension & Axle. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Suspension. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Rear Stabilizer Bar -- Removal |
| 1. REMOVE REAR WHEEL |
| 2. REMOVE REAR STABILIZER LINK ASSEMBLY LH |
Remove the nut and disconnect the link from the suspension No. 2 arm.
 |
Remove the nut and link from the stabilizer bar.
| 3. REMOVE REAR STABILIZER LINK ASSEMBLY RH |
- HINT:
- Use the same procedures described for the LH side.
| 4. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY LH |
 |
Remove the bolt, nut and suspension arm from the suspension member.
| 5. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY RH |
- HINT:
- Use the same procedures described for the LH side.
| 6. REMOVE REAR COIL SPRING INSULATOR UPPER LH |
Remove the insulator upper from the coil spring.
| 7. REMOVE REAR COIL SPRING LH |
Remove the coil spring from the suspension No. 2 arm.
| 8. REMOVE REAR COIL SPRING INSULATOR LOWER LH |
Remove the insulator lower from the suspension No. 2 arm.
| 9. REMOVE REAR COIL SPRING INSULATOR UPPER RH |
- HINT:
- Use the same procedures described for the LH side.
| 10. REMOVE REAR COIL SPRING RH |
- HINT:
- Use the same procedures described for the LH side.
| 11. REMOVE REAR COIL SPRING INSULATOR LOWER RH |
- HINT:
- Use the same procedures described for the LH side.
| 12. REMOVE REAR NO. 1 STABILIZER BAR BRACKET |
Remove the 2 nuts and bracket.
- HINT:
- Use the same procedures for the other side.
 |
| 13. REMOVE REAR STABILIZER BAR |
Remove the stabilizer bar from the vehicle.
- NOTICE:
- When removing the stabilizer bar from the vehicle, make sure not to damage the sensor wire, brake hose, etc.
| 14. REMOVE REAR STABILIZER BUSH |
Remove the 2 stabilizer bushes from the stabilizer bar.