Rear Axle Hub Bolt Replacement

Suspension & Axle. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Axle. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. REMOVE REAR WHEEL

  2. REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY LH

  3. REMOVE REAR DISC

  4. REMOVE REAR AXLE HUB BOLT

  5. INSTALL REAR AXLE HUB BOLT

  6. INSTALL REAR DISC

  7. INSTALL REAR DISC BRAKE CYLINDER ASSEMBLY LH

  8. INSTALL REAR WHEEL

Rear Axle Hub Bolt -- Replacement


HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are the LH side.


1. REMOVE REAR WHEEL


2. REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY LH


Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Remove the 2 bolts and cylinder.



3. REMOVE REAR DISC


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Axle.Axle System.Rear Axle Hub Bolt Replacement

  1. Put matchmarks on the disc and axle hub.

  1. Release the parking brake.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Turn the shoe adjuster until the disc turns freely, and then remove the disc.

  1. Install the shoe adjusting hole plug to the rear disc.



4. REMOVE REAR AXLE HUB BOLT


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Axle.Axle System.Rear Axle Hub Bolt Replacement

  1. Using SST and a brass bar or equivalent to hold the axle shaft, remove the hub bolt that needs to be replaced.

    SST
    09650-17011


5. INSTALL REAR AXLE HUB BOLT


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Axle.Axle System.Rear Axle Hub Bolt Replacement

  1. Insert a new hub bolt into the bolt hole. Set a plate washer and nut on the hub bolt end.

  1. Using a brass bar or equivalent to hold the rear axle, install the hub bolt by tightening the nut. Then remove the nut and plate washer.



6. INSTALL REAR DISC


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Axle.Axle System.Rear Axle Hub Bolt Replacement

  1. Align the matchmarks and install the disc.

    HINT:
    When replacing the disc with a new one, select the installation position where the disc has the smallest runout.


7. INSTALL REAR DISC BRAKE CYLINDER ASSEMBLY LH


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Install the cylinder with the 2 bolts.

    Torque:
    26.5 N*m{270 kgf*cm, 20 ft.*lbf}


8. INSTALL REAR WHEEL
Torque:
103 N*m{1050 kgf*cm, 76 ft.*lbf}