Transaxle Oil Pan Removal

Remove the 6 screws, 10 clips and under cover.

Remove the 2 clips and under cover.

Remove the 4 bolts and reinforcement.

Using a 6 mm socket hexagon wrench, remove the overflow plug and gasket from the continuously variable transaxle assembly.

Using a 6 mm socket hexagon wrench, remove the No. 1 transmission oil filler tube from the oil pan and drain the continuously variable transaxle fluid.

Remove the 19 bolts and oil pan from the transaxle.

NOTICE:

Some fluid will remain in the oil pan. To prevent the fluid from spilling, place a container under the oil pan, and then carefully remove all the pan bolts and oil pan assembly.

Remove the gasket from the oil pan.

Remove the 3 magnets from the oil pan.

NOTICE:

1. Clean the oil pan and remove any metal particles, sludge, etc.
   
2. Clean off any metal particles that adhere to the magnets.