Transmission. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Eb61 Manual Transaxle. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Back-Up Light Switch -- Removal |
1. REMOVE NO. 2 CYLINDER HEAD COVER |
Hold the rear of the cover and raise it to detach the 2 clips on the rear of the cover. Continue to raise the cover to detach the 2 clips on the front of the cover and remove the cover.
- NOTICE:
- Attempting to detach both front and rear clips at the same time may cause the cover to break.
![]() |
2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY |
Disconnect the mass air flow meter connector.
![]() |
Detach the clamp.
Disconnect the No. 2 ventilation hose from the cylinder head cover.
![]() |
Squeeze the taps of the air cleaner hose clamp, and then disconnect the air cleaner hose from the throttle body.
Detach the 2 hook clamps, and then remove the air cleaner cap and hose.
![]() |
3. REMOVE AIR CLEANER CASE |
Disconnect the wire harness clamp from the air cleaner case.
![]() |
Remove the 3 bolts and air cleaner case.
4. REMOVE BACK-UP LIGHT SWITCH ASSEMBLY |
Disconnect the back-up light switch connector.
Using SST, remove the back-up light switch and gasket from the transaxle case.
- SST
- 09817-16011
![]() |