Shift Lever Assembly -- Installation |
| 1. INSTALL FLOOR SHIFT SHIFT LEVER ASSEMBLY |
 |
Install the shift lever with the 4 bolts.
- Torque:
- 12 N*m{122 kgf*cm, 9 ft.*lbf}
Attach the 4 wire harness clamps.
 |
| 2. CONNECT TRANSAXLE CONTROL CABLE ASSEMBLY |
 |
Connect the ends of the control cable and install the 2 clips to the shift lever.
Turn the lock nuts of the shift cable 270° counterclockwise, and hold them in that position.
 |
Install the shift cable and select cable while holding the lock nuts.
Check that the cables are installed securely.
Push in the cable locks of the shift cable and select cable.
 |
| 3. ADJUST TRANSAXLE CONTROL CABLE ASSEMBLY |
Adjust control cable (RAV4_ACA30 RM000001YVA009X.html).
for new shift lever:
Remove the stopper pin and dispose of it.
| 4. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY |
Connect the connector.
Install the rear console box with the 2 bolts and attach the wire harness clamp.
 |
Install the 2 screws.
 |
| 5. INSTALL CONSOLE REAR END PANEL |
Attach the 6 claws to install the console rear end panel.
 |
| 6. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY |
Connect the connectors.
 |
Attach the 4 clips to install the upper rear console panel.
| 7. INSTALL CONSOLE CUP HOLDER BOX |
Attach the 2 clips to install the cup holder box.
 |
Install the 2 screws.
| 8. INSTALL SWITCH BASE |
Connect the connectors.
 |
Attach the 2 clips and 2 claws to install the switch base.
| 9. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
Attach the 2 clips and 4 claws to install the upper console panel.
 |
| 10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
for Manual Transaxle:
Twist the shift lever knob in the direction indicated by the arrow to install it.
 |
for Automatic Transaxle:
Twist the shift lever knob in the direction indicated by the arrow to install it.
 |
| 11. INSTALL NO. 2 CONSOLE UPPER PANEL GARNISH |
Attach the 4 clips to install the upper panel garnish.
 |
| 12. INSTALL NO. 1 CONSOLE UPPER PANEL GARNISH |
Attach the 4 clips to install the upper panel garnish.
 |