Engine. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
2Az-Fe Charging. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Generator -- Disassembly |
| 1. REMOVE GENERATOR PULLEY WITH CLUTCH |
Remove the cap from the pulley.
Using a screwdriver, puncture the center of the cap and pry it off.
- NOTICE:
- Do not reuse the cap.
 |
Install SST to the pulley and vise as shown in the illustration.
- SST
- 09820-63021
 |
Mount SST (A) in a vise.
Turn SST (B) clockwise to loosen the pulley.
 |
Remove the pulley.
| 2. REMOVE GENERATOR BRUSH HOLDER ASSEMBLY |
 |
Remove the 3 nuts and generator rear end cover.
Remove the terminal insulator.
 |
Remove the 2 screws and generator brush holder.
 |
| 3. REMOVE GENERATOR ROTOR ASSEMBLY |
Remove the bolt and cord clip.
 |
Remove the 4 bolts.
 |
Using SST, remove the coil.
- SST
- 09950-40011(09951-04020,09952-04010,09953-04020,09954-04010,09955-04071,09957-04010)
 |
Remove the washer.
Remove the generator rotor.