Starter Relay On-Vehicle Inspection

Engine. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
2Gr-Fe Starting. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE STARTER RELAY (Marking: ST)

  3. INSPECT STARTER RELAY (Marking: ST)

  4. INSTALL STARTER RELAY (Marking: ST)

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Starter Relay -- On-Vehicle Inspection



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE STARTER RELAY (Marking: ST)

  1. Remove the starter relay from the No. 7 relay block.



3. INSPECT STARTER RELAY (Marking: ST)


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.2Gr-Fe Starting.Starting System.Starter Relay On-Vehicle Inspection

  1. Measure the resistance of the relay.

    Standard resistance:
    Tester Connection
    		Specified Condition
    3 - 5
    		10 kΩ or higher
    3 - 5
    		Below 1 Ω
    (when battery voltage is applied to terminals 1 and 2)
    If the resistance is not as specified, replace the relay.


4. INSTALL STARTER RELAY (Marking: ST)


5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL