Heated Oxygen Sensor Installation

Engine. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
2Az-Fe Emission Control. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. INSTALL HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  3. CHECK FOR EXHAUST GAS LEAKS

Heated Oxygen Sensor -- Installation



1. INSTALL HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)


Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.2Az-Fe Emission Control.Emission Control System.Heated Oxygen Sensor Installation

  1. Using SST, install the sensor to the front exhaust pipe.

    SST
    09224-00010
    Torque:
    40 N*m{408 kgf*cm, 30 ft.*lbf}for use with SST
    44 N*m{449 kgf*cm, 32 ft.*lbf}for use without SST
    HINT:
    1. Use a torque wrench with a fulcrum length of 30 cm (11.81 in.).
    2. Make sure SST and wrench are connected in a straight line.

  1. Connect the sensor connector.



2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


3. CHECK FOR EXHAUST GAS LEAKS