Ecm Installation

Engine. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
2Az-Fe Engine Control System. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. INSTALL ECM

  2. INSTALL AIR CLEANER CASE

  3. INSTALL AIR CLEANER CAP

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  5. PERFORM REGISTRATION

  6. RESET MEMORY (for Automatic Transaxle)

Ecm -- Installation



1. INSTALL ECM


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Install the 2 brackets to the ECM with the 4 screws.

    Torque:
    3.0 N*m{30 kgf*cm, 27 in.*lbf}


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Connect the 2 ECM connectors.

    NOTICE:
    When connecting the connector, make sure that dirt, water and other foreign matter does not become stuck between the connector and the other part.

    1. Connect the 2 ECM connectors and lower the 2 levers.

      NOTICE:
      Make sure that the 2 levers are securely lowered.


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Install the ECM with the 3 bolts.

    Torque:
    6.5 N*m{66 kgf*cm, 57 in.*lbf}


2. INSTALL AIR CLEANER CASE


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Install the air cleaner case with the 3 bolts.

    Torque:
    5.0 N*m{51 kgf*cm, 44 in.*lbf}

  1. Connect the harness clamp.



3. INSTALL AIR CLEANER CAP

  1. Install the air cleaner filter element onto the air cleaner case.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.2Az-Fe Engine Control System.Sfi System.Ecm Installation

  1. Insert the hinge part of the air cleaner cap into the air cleaner case, then hang the 2 hook clamps.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.2Az-Fe Engine Control System.Sfi System.Ecm Installation

  1. Align the matchmarks of the No. 1 air cleaner hose and throttle body, and then connect the air cleaner hose No. 1 to the throttle body and unfasten the No. 1 air cleaner hose clamp.

    NOTICE:
    Make sure that the hose clamp is at the correct angle.


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Connect the purge line hose to the clamp.

  1. Connect the No. 2 ventilation hose to the air cleaner hose.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Connect the 4 wire harness clamps.

  1. Connect the mass air flow meter connector.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


5. PERFORM REGISTRATION

  1. When replacing the ECM, perform vehicle stability control system recognition in ECM (RAV4_ACA30 RM00000226C001X.html).



6. RESET MEMORY (for Automatic Transaxle)

  1. When replacing the ECM, perform the RESET MEMORY procedure (A/T initialization) (RAV4_ACA30 RM000000W7F0AMX.html).